DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > What could possibly go wrong?




Reply
 
Thread Tools Search this Thread Display Modes
Old 09-28-2012, 04:15 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default What could possibly go wrong?

A client needs a light bulb changed over a stairwell so I need a way for a regular 4' stepladder to stand on a firm and level foundation.

I'm building a rigid box 24" x 24" x 8" with one open side with gusset plates in the corners that doubles as a 24" high ladder base that goes two steps down from the upper support step.

For differences in the steps I'll have plywood plates 1/4", 1/2" and 1" which can be placed under the box or the ladder and gives me a range of adjustment from 1/4" to 1-3/4" in 1/4" increments.

I have a body harness from Grainger for tree work and so this with a rope fastened to the top of the staircase will be my backup in case of a problem.

If it turns out to be too risky I'll still have a GP box.



__________________

Last edited by Wuzzat?; 09-28-2012 at 04:25 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 09-28-2012, 05:43 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,706
Liked 921 Times on 822 Posts
Likes Given: 1585

Default

http://www.google.ca/search?q=adjust...w=1016&bih=523


__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 09-28-2012, 07:04 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Thanks for the link. The thing is, this is only the second time in many years that I have been called on to do this kind of task so I'm reluctant to buy yet another ladder. I just do handyman work.

This box works well enough that I'm going to put carrying handles on it. It's 10 pcs of scrap wood, 8 screws, a handful of nails and less than two hours labor.

I will need to use it with a level since I find there are no usable horizontal lines on a staircase to use as a reference.
Also, at 2' wide I noticed that it's difficult to walk around it on a narrow staircase but I may not need to walk around it.
Both of these things may also be true of the commercially available versions.

After I cut the shim plates the next test is to check the stability on heavily carpeted stairs.

__________________

Last edited by Wuzzat?; 09-28-2012 at 07:15 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2012, 04:04 PM  
Housedoctor57
Member
 
Join Date: Mar 2010
Posts: 40
Liked 4 Times on 4 Posts

Default

You can rent a little giant or similar ladder cheap. What do you figure medical cost will be for fractured arm, leg, etc.
Just add the rent into your bill.

__________________
Housedoctor57 is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2012, 05:13 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Quote:
Originally Posted by Housedoctor57 View Post
You can rent a little giant or similar ladder cheap. What do you figure medical cost will be for fractured arm, leg, etc.
Just add the rent into your bill.
I looked through the manual for the Little Giant and I see now why the telescoping legs flare out. A lot of thought went into that thing.

And for reasons I didn't anticipate, even on hard stairs there is a little wobble with this box thing. So for the time being I've got myself a GP box.

BTW, the last time I was in the ER they had a GOMER - Get Out of My Emergency Room or Grand Old Man of the Emergency Room.
That was pretty entertaining until one of the techs called security and this huge dude frog-marched the guy out into the parking lot.
He was a provocative, articulate, intelligent little twerp and everybody was getting pulled into his unhappy camper routine. There was a bit of a paranoid flavor to his accusations.
The tech said that the last time they had one of those was months ago. I should have asked about the last time "the knife & gun club" had paid a visit.
__________________

Last edited by Wuzzat?; 09-30-2012 at 05:31 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2012, 05:56 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,681
Liked 493 Times on 410 Posts
Likes Given: 150

Default

Let us know where we can send cards and flowers.

__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 01:24 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,292
Liked 403 Times on 314 Posts
Likes Given: 166

Default

OK, I built this stair platform to hang a very large mirror in a stairway ... You can make it larger but the principle works great. I actually shot screws down through the top and allowed them to protrude slightly to catch the carpeting on the stairs.

https://docs.google.com/viewer?a=v&q...ELe82Kig&pli=1

It was almost as wide as the stair, so I mounted my ladder and climbed as highas I needed to go. If you are shakey, get a helper to hold the ladder while you do your thing.

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 02:51 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Quote:
Originally Posted by CallMeVilla View Post
OK, I built this stair platform to hang a very large mirror in a stairway ... You can make it larger but the principle works great. I actually shot screws down through the top and allowed them to protrude slightly to catch the carpeting on the stairs.

https://docs.google.com/viewer?a=v&q...ELe82Kig&pli=1

It was almost as wide as the stair, so I mounted my ladder and climbed as highas I needed to go. If you are shakey, get a helper to hold the ladder while you do your thing.
Yes, that horizontal stabilizing plate is what I hoped to avoid.

Have you noticed that ladders that lean against something, and very short stepladders, are just as wide at the bottom as at the top?
The 4' and 6' stepladders are wider at the bottom and there is probably some rule of thumb for stepladder height vs. base width for a given amount of stability.

Thanks for the pix!
__________________

Last edited by Wuzzat?; 10-01-2012 at 03:00 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 02:52 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Quote:
Originally Posted by oldog/newtrick View Post
Let us know where we can send cards and flowers.
My survivors would prefer cash. . .
__________________
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 05:45 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,706
Liked 921 Times on 822 Posts
Likes Given: 1585

Default

If you don't want to buy a new ladder, bolt on extention legs made out of 2x4.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
What is wrong with society Daddytron General Chit-Chat 21 05-07-2012 10:21 AM
can anyone tell me what this kind of molding is called? and possibly where to find it PatDoody Carpentry and Woodworking 6 04-13-2011 11:31 AM
Leak Under the Sink - possibly air gap related Mackadoo General Home Improvement Discussion 2 04-27-2010 10:21 PM
Jim was right, I was wrong. Nestor_Kelebay Flooring 1 05-06-2009 02:05 PM
What's wrong with my kegerator nberggren General Appliance Discussion 8 01-25-2009 09:03 PM

Newest Threads

LATEST SPONSOR DEALS