DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > Can I install flooring perpendicular to a hump in floor?




Reply
 
Thread Tools Search this Thread Display Modes
Old 02-26-2013, 06:39 PM  
m2244
Member
 
Join Date: Oct 2009
Posts: 55
Liked 1 Times on 1 Posts
Likes Given: 9

Default Can I install flooring perpendicular to a hump in floor?

Hello,

I am in the middle of a bedroom remodel. The subfloor is old 1x boards and they have gaps between them anywhere from 1/8 to 3/8. I am currently laying down 1/2" plywood over the existing 1x boards, glueing and screwing the hell out of it. The problem is that you can feel a hump down the center of the house. Not sure how to measure this hump to give anyone an idea how bad it is. My question is, will this hump bother our hardwood floor install? I plan on putting 5/8 solid bamboo stranded flooring down. The flooring strips would run perpenducular to this hump. So, I wonder if the flooring strips would flex enough over this hump. The fact that it's stranded bamboo worries me with flexing.



__________________
m2244 is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 07:25 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,977
Liked 963 Times on 856 Posts
Likes Given: 1650

Default

Find a peice of wood or something that will span from the side of the room to the center of the hump and then measure the gap close to the hump, do both sides.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 07:45 PM  
m2244
Member
 
Join Date: Oct 2009
Posts: 55
Liked 1 Times on 1 Posts
Likes Given: 9

Default

Quote:
Originally Posted by nealtw View Post
Find a peice of wood or something that will span from the side of the room to the center of the hump and then measure the gap close to the hump, do both sides.

It looks about 11/16 in 4 feet on one side of the hump and about 7/8 in 4 feet on the other side.
__________________
m2244 is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 08:13 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,977
Liked 963 Times on 856 Posts
Likes Given: 1650

Default

That's not a hump, it's a curb. The first choice is to find the cause and fix that. Can you see what's going on from under. Do the floor joists run in the same direction as the hump?
Short of fixing the whole floor, you might cut tapered firring strips to put above the floor joists and then use 5/8 t&g plywood.
Level may not be practical but somewhat straight is needed.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 08:42 PM  
m2244
Member
 
Join Date: Oct 2009
Posts: 55
Liked 1 Times on 1 Posts
Likes Given: 9

Default

Not sure if it's much of an option. Damn old houses! Can we still put in the flooring. The old flooring was spruce I believe.

The worst mistake of my life was buying this friggin place! Getting seriously discouraged.

__________________
m2244 is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 08:55 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,977
Liked 963 Times on 856 Posts
Likes Given: 1650

Default

You've already covered it with plywood?
Direction of joists?

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 09:00 PM  
Jaz
Ceramic Tile Pro
 
Jaz's Avatar
 
Join Date: Mar 2006
Location: Troy, Michigan
Posts: 77
Liked 13 Times on 10 Posts

Default

Yea, that's pretty bad, it needs to be fixed unless you go with carpeting. It'll look and feel bad with carpeting too but........

So this 1x is the subfloor? How wide are the boards?

Jaz

__________________

Tile 4 You LLC
Troy, Michigan
www.tile4you.com

I've NEVER made a mistake....I thought I did once....but I was WRONG!

Jaz is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 09:17 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,977
Liked 963 Times on 856 Posts
Likes Given: 1650

Default

Put a 1" spacer on each side of the room and lay a straight edge across to see if the floor is sagging or does it just have a hump.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-27-2013, 06:25 AM  
samfloor
Carpet Installer
 
samfloor's Avatar
 
Join Date: May 2010
Location: Buckner, Missouri
Posts: 215
Liked 23 Times on 19 Posts
Likes Given: 5

Default

You can install vinyl or carpet. That's about all.

__________________

[url]http://www.flooringforum.com/forum/[/url]


(AKA Floorist, Rusty Baker)

samfloor is offline  
 
Reply With Quote Quick reply to this message
Old 02-27-2013, 08:25 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,977
Liked 963 Times on 856 Posts
Likes Given: 1650

Default

You guys give up to soon, this has to be fixed evan for carpet, you can't have a 1" trip hazard in the middle of the floor!



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
How level/even should a floor be for hardwood install? m2244 Flooring 1 01-31-2013 09:44 PM
I need a cheap, easy to install flooring NatalieM Flooring 4 02-24-2011 06:43 PM
Flooring prep question - hump in the floor stratocaster1422 Flooring 2 07-16-2009 10:29 AM
Hardwood floor install above plaster ceiling dawnn Flooring 2 06-24-2007 12:17 PM
Can I install cabinets over Laminate flooring? Fat B Flooring 3 01-26-2007 07:37 AM

Newest Threads

LATEST SPONSOR DEALS