Thanks. I didn't even think to look at the label/nameplate. But it did get it to work and it sounds great! It's just not rotating in the right direction. It should turn CW but it is going CCW. This fan has the option to go both directions. Before I had cut off the shaft, I tested it to see if it was going in the right direction, it wasn't so I swapped out the solid brown wire for the brown w/ white stripe and I could have sworn it went CW! So I cut the shaft down, adjusted the mounting screws, set the ground wire (which the old fan did not have) and zip tied everything nice and neat and tested it before I set it back over the compressor & it went CCW!? By that time it was dark and I was probably hallucinating by that point so I closed it up and will try again in the morning.
I will look at the nameplate in the morning & I hope it tells me how to get it to go CW. There is a wire harness connector that comes out of the side separate from the other wires, kind of like a loop-back it's white and black wires, I wonder if that somehow has something to do with the rotating direction?
Well thanks for all your help. I hope I can get it to rotate properly in the morning it's suppose to be 95 here on Wednesday.