DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Wood or Ployethlyne closure strips for PVC corrugated roofing?




Reply
 
Thread Tools Search this Thread Display Modes
Old 06-24-2013, 12:29 PM  
SBay_ecologist
Junior Member
Join Date: Jun 2011
Location: Santa Clara, california
Posts: 23
Liked 3 Times on 3 Posts

Default Wood or Ployethlyne closure strips for PVC corrugated roofing?

Hello All:

I have a lean-to pergola at the back. I am installing PVC corrugated roofing at the top.

There will be overhangs on both sides, vertical to the closure strips. At Lowes I saw wood and polye. closure strips (http://www.lowes.com/pd_97559-1115-2...ductId=3048079 and http://www.lowes.com/pd_12564-293-R7...ductId=3010420 )

I am inclined to use wood all throughout the project: I really do not need 100% sealing, and wood give me better support.

Any comments?

Al


SBay_ecologist is offline  
 
Reply With Quote
Old 06-24-2013, 12:44 PM  
bud16415
Fixer Upper
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 2,007
Liked 633 Times on 490 Posts
Likes Given: 237

Default

I don’t know what one is stronger. They both would need some structure below them for support so it’s just a matter of what look goes best with the rest of the design I would say.


bud16415 is online now  
 
Reply With Quote
Old 06-25-2013, 05:39 AM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

Whichever you choose, I would stay consistent.

I am not certain that the wood give you that much more structure in this case without seeing the two materials in person.
WindowsonWashington is offline  
 
Reply With Quote
Old 06-25-2013, 10:28 AM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,840
Liked 1400 Times on 1234 Posts
Likes Given: 2420

Default

The wood ones split and can mold up when they get wet, I've never used the plastic ones.
nealtw is online now  
 
Reply With Quote
Old 06-27-2013, 12:12 AM  
SBay_ecologist
Junior Member
Join Date: Jun 2011
Location: Santa Clara, california
Posts: 23
Liked 3 Times on 3 Posts

Default

Thanks for all the answers.

I think I will go with the wood ones. I painted some, so it won't hopefully mold. Here in California, mold is usually not much of an issue, anyhow.

I will also pre-drill so that the wood won't split.

I'll follow up if I run across any problems.

Al
SBay_ecologist is offline  
nealtw Likes This 
Reply With Quote
Old 07-04-2013, 01:46 AM  
SBay_ecologist
Junior Member
Join Date: Jun 2011
Location: Santa Clara, california
Posts: 23
Liked 3 Times on 3 Posts

Default

Hello All:

Here is what I have found out so far:

- The wood ones do indeed split, even with predrilling. Fortunately, the split is localized. However, no telling if it would spread over time. The splits I have seen so far are length-wise.

The way it looks, the contour of the closure strip does not quite match that of the panels.

- The screws that they sell are a bit short (1.25"). I needed at least 2" ones in some places.
SBay_ecologist is offline  
nealtw Likes This 
Reply With Quote
Old 07-06-2013, 12:06 PM  
SBay_ecologist
Junior Member
Join Date: Jun 2011
Location: Santa Clara, california
Posts: 23
Liked 3 Times on 3 Posts

Default

Just uploaded three photos showing the finished project:

http://www.houserepairtalk.com/photo...-work-172.html
SBay_ecologist is offline  
 
Reply With Quote
Old 07-06-2013, 12:15 PM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 7,236
Liked 721 Times on 592 Posts
Likes Given: 230

Default

Al, do you have the roof from the house extending over the panel roof? Is so, how much?
oldognewtrick is offline  
 
Reply With Quote
Old 07-07-2013, 08:46 PM  
SBay_ecologist
Junior Member
Join Date: Jun 2011
Location: Santa Clara, california
Posts: 23
Liked 3 Times on 3 Posts

Default

Actually the corrugated panel has an overhang over the roof just as it does over the patio.

See attached photo.

(If photo does not show, I will also upload it to:

http://www.houserepairtalk.com/photo...-work-172.html )


20130707_192500.jpg  
SBay_ecologist is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
painting corrugated fiberglass Garbo Painting Forum 2 07-19-2010 09:29 AM
Tiles or corrugated iron? LindaDellar Roofing and Siding 4 04-22-2010 01:41 PM
Fore closure/ property for sale? kwmainer General Chit-Chat 6 08-23-2009 07:10 AM
Working Around Furring Strips LanceM Electrical and Wiring 8 02-12-2008 12:57 AM
Basement Furring Strips LanceM Flooring 6 02-06-2008 08:07 PM

Newest Threads

LATEST SPONSOR DEALS