DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Fixing stool flange Oooops




Help Support House Repair Talk by donating using the link above.
Reply
 
Thread Tools Search this Thread
Old 07-24-2013, 10:44 AM  
Fireguy5674
Junior Member
Join Date: Dec 2012
Location: Jacksonville, Illinois
Posts: 184
Liked 35 Times on 30 Posts
Likes Given: 21

Default Fixing stool flange Oooops

I have a toilet flange issue. The toilet flange is in a poured concrete floor with heater tubing in the floor. The flange ended up about 1" low. What is the easiest way to get the toilet flange on top of the slab as it should be? Seems like I have heard of using a second flange that is designed to fit into the original. Open to suggestions.


Fireguy5674 is offline  
 
Reply With Quote
Old 07-24-2013, 11:08 AM  
bud16415
Fixer Upper
HRT_ADMIN.png
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 4,595
Liked 1579 Times on 1206 Posts
Likes Given: 844

Default

something like this maybe??

http://www.amazon.com/Set-Rite-Origi.../dp/B0025VS1US


bud16415 is online now  
 
Reply With Quote
Old 07-24-2013, 02:12 PM  
CallMeVilla
Senior Member
 
CallMeVilla's Avatar
Join Date: Feb 2010
Location: San Diego
Posts: 1,641
Liked 590 Times on 449 Posts
Likes Given: 246

Default

Better seal the surfaces permanently if you are using a flange extender. You never want any leakage. You can also use two wax rings to help make up the difference. (Common usage in plumbing world)

Just for my interest -- How in the hell did the flange get set 1" below finished grade? Didn't anyone check the height? I try to get to no more than 1/16" above grade ... and the top of the flange has to be level in both directions.

WOW??
CallMeVilla is offline  
 
Reply With Quote
Old 07-24-2013, 03:10 PM  
nealtw
Contractor retired
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,710
Liked 3052 Times on 2671 Posts
Likes Given: 5043

Default

Quote:
Originally Posted by CallMeVilla View Post
Better seal the surfaces permanently if you are using a flange extender. You never want any leakage. You can also use two wax rings to help make up the difference. (Common usage in plumbing world)

Just for my interest -- How in the hell did the flange get set 1" below finished grade? Didn't anyone check the height? I try to get to no more than 1/16" above grade ... and the top of the flange has to be level in both directions.

WOW??
Crap happens!
nealtw is online now  
 
Reply With Quote
Old 07-24-2013, 03:54 PM  
Fireguy5674
Junior Member
Join Date: Dec 2012
Location: Jacksonville, Illinois
Posts: 184
Liked 35 Times on 30 Posts
Likes Given: 21

Default

Bud,
That is exactly what I was thinking of thanks.

Villa,
I kind of walked into the middle of this one and this is what I got handed. I have often used the double wax ring but did not think that would be tall enough in this case.


Fireguy5674 is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Water staining on interior window sill/stool Brettj Windows and Doors 4 09-19-2015 05:20 PM
Sink Strainer Oooops CallMeVilla Plumbing Forum 1 09-05-2013 06:59 PM
toilet flange o2284200 Plumbing Forum 17 05-29-2013 09:54 PM
Corroded Bathtub Flange chrislorenc Plumbing Forum 4 05-17-2011 08:25 AM
Stool Creepers MachiaMan Garage & Workshop Forum 0 09-10-2008 02:35 PM



Newest Threads