DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Walls and Ceilings > Drywall lift as temp wall support




Reply
 
Thread Tools Search this Thread Display Modes
Old 11-05-2013, 09:19 PM  
planner101
Junior Member
 
Join Date: Aug 2013
Posts: 15
Liked 2 Times on 2 Posts
Likes Given: 2

Default Drywall lift as temp wall support

I'm removing a load bearing wall dividing the kitchen and dining room apart... it's about 9ish feet long. I actually know someone who used to be a general contractor whose going to help me with this.


But I was just wondering... and please just a simply no or yes will do.

It's a single story house in Florida, will no basement on concrete slab with no crawlspace...

I know we have to put a temp wall support up, but I saw a drywall lift and thought... hmmm, wonder if that could act as a temp wall support. And I only thought this because it's just a short wall and we are not taking the "whole" thing down. The wall in question has a doorway and I'm keeping the doorway in the wall. I guess we are just making a huge doorway about 6 feet long essentially.

Anyways, could someone use a drywall lift as a temp wall support if the job was small enough?



__________________
planner101 is offline  
 
Reply With Quote Quick reply to this message
Old 11-05-2013, 10:30 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,980
Liked 964 Times on 857 Posts
Likes Given: 1650

Default

The lift is designed to lift maybe 200 pounds. You likely need a temp wall on both sides of the wall.

My simple answer would be "no"



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 11-05-2013, 11:07 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,309
Liked 409 Times on 319 Posts
Likes Given: 171

Default

OMG ... a few 2x4s and a few nails ... Build the temp wall to be safe.

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 11-06-2013, 05:56 AM  
bud16415
Fixer Upper
 
bud16415's Avatar
 
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 1,375
Liked 421 Times on 329 Posts
Likes Given: 137

Default

I went to type NO and it said I needed 10 characters to lengthen my message.
It seems there are no short answers here.


My longer answer to your question is “NO”.

__________________
bud16415 is offline  
planner101 Likes This 
Reply With Quote Quick reply to this message
Old 11-06-2013, 11:23 AM  
planner101
Junior Member
 
Join Date: Aug 2013
Posts: 15
Liked 2 Times on 2 Posts
Likes Given: 2

Default

Alright thanks guys...

Sorry if it was dumb I was just thinking

__________________
planner101 is offline  
 
Reply With Quote Quick reply to this message
Old 11-06-2013, 12:23 PM  
bud16415
Fixer Upper
 
bud16415's Avatar
 
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 1,375
Liked 421 Times on 329 Posts
Likes Given: 137

Default

Not dumb just not heavy duty enough for the job required. If you never used one or saw on how would you know if it would work or not. Nothing wrong with asking.

The bigger question you should be asking is how to go about taking out that wall safely.

__________________
bud16415 is offline  
 
Reply With Quote Quick reply to this message
Old 11-06-2013, 02:33 PM  
Drywallinfo
Senior Member
 
Join Date: May 2013
Posts: 144
Liked 29 Times on 24 Posts
Likes Given: 9

Default

No to your question. But also, get your supports (2x4's) in there before a significant part of this wall is taken down!

__________________

- Taping & Finishing Drywall Joints
- Inside & Outside Corner Drywall Joints
- How to Repair Small and Big Holes
- How to Build and Finish Drywall Arches
- How to Apply or Repair Texture
Free Tutorials at http://www.drywallinfo.com

Drywallinfo is offline  
 
Reply With Quote Quick reply to this message
Old 11-06-2013, 04:09 PM  
GBR
Senior Member
 
Join Date: Mar 2009
Posts: 345
Liked 21 Times on 20 Posts
Likes Given: 9

Default

Unanimous, lol. Bottom chart; http://publicecodes.cyberregs.com/ic...9_5_par024.htm

Gary

__________________
GBR is offline  
 
Reply With Quote Quick reply to this message
Old 11-06-2013, 06:33 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,980
Liked 964 Times on 857 Posts
Likes Given: 1650

Default

Remove some drywall first, you are looking for 2 or more studs nailed together to make a post. That would be a bearing point, not to be messed with.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Wall For Additional Support coachdan Carpentry and Woodworking 3 03-29-2011 06:28 PM
Cracked cinder block wall, low temp repairs Corvy Bricks, Masonry and Concrete 7 03-17-2010 05:38 PM
bowed wall, squeeky floor, cracked drywall circuiteds Flooring 1 06-05-2009 03:32 PM
lift Larry M Framing and Foundation 1 04-23-2009 03:50 PM
make drywall look like concrete wall josiepk Framing and Foundation 1 09-27-2005 04:19 PM

Newest Threads

LATEST SPONSOR DEALS