DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > How to replace this door strip




Reply
 
Thread Tools Search this Thread Display Modes
Old 11-09-2013, 06:07 AM  
m2244
Member
 
Join Date: Oct 2009
Posts: 55
Liked 1 Times on 1 Posts
Likes Given: 9

Default How to replace this door strip

I know this isn't rocket science but how do you replace the door strip in this picture? Does is just snap in or does the whole molding that's holding it need to be replaced?

I have tried to look for this at a local lumber yard but can't find anything that looks right. Does anyone know where to get this.

Thanks for the help.



P1010011.jpg  
__________________
m2244 is offline  
 
Reply With Quote Quick reply to this message
Old 11-09-2013, 09:02 AM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,309
Liked 409 Times on 319 Posts
Likes Given: 171

Default

Ugly door but fixable. I added notes to your picture (below) to help explain the work. The door stop can be replaced. No problem. The side jamb is a serious issue ... try to clean it up or you might as well replace the entire door with a new one. The closing hardware is shot. Remove and replace. (easy)



Door - Replacing Jamb 1.jpg  
__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 11-09-2013, 08:07 PM  
Blue Jay
Senior Member
 
Blue Jay's Avatar
 
Join Date: Jun 2008
Location: La Rue, Ohio
Posts: 252
Liked 10 Times on 10 Posts
Likes Given: 19

Default

Looks like some of the stuff I had in our old farm house, I think it was a felt type strip and was glued in place with maby a few small nails.

__________________
Blue Jay is offline  
 
Reply With Quote Quick reply to this message
Old 12-15-2013, 05:37 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,397
Liked 51 Times on 42 Posts
Likes Given: 2

Default

That jamb needs a bunch of work before worrying about that seal.
It was shimmed wrong and the jamb may be twisted causing all the gouges on the latch plate.
It needs to be sanded to get rid of all the dents, gouges and scraped off paint.
Primed and repainted two coats.
Any place selling Masonite doors should have that weather sealing stock.
Just grab ahold of it at the bottom with a pair of pliers and pull it out.
Any box store will have a weather stripping that's an aluminum strip with a bulb of white rubber seal on it that gets screwed to the jambs in elongated slots that will work better to seal it.
















CLOSE


MD Building Products
Top and Side Door Jamb Weatherstrip Set



Model # 01958

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Can I replace this window inside old door? ilyaz Windows and Doors 3 11-15-2013 06:03 PM
Replace Door Switch sdupp General Appliance Discussion 8 11-10-2013 01:06 PM
replace garage door opener cfli1688c1 Windows and Doors 1 01-14-2010 01:22 PM
replace doors and door casing shan2themax Carpentry and Woodworking 9 09-19-2008 11:07 PM
Replace sliding patio door Quattro Windows and Doors 15 10-16-2006 09:58 AM

Newest Threads

LATEST SPONSOR DEALS