Whirlpool Gold Series Dishwasher not draining completly
I have a Whirlpool Gold Series Dishwasher. Model # WDT710PAYM0. It is not draining completely. It has about an inch or so of water left after its cycle and I am have to push the Stop (Drain) Button again once the cycle is complete to get all the water out.
I have pulled it out and disconnected all the hoses and cleaned them. I pulled the drain pump to check it as well. That is fine as well.
I disconnected the drain hose from the sink and had it drain in a 5 gal bucket. It drains but like above I have to push "Stop" again to get it to drain all the way.
Any ideas of what the problem is. Is there a way to set the timer on the drain pump so it runs longer or is there another place that can be clogged that I haven't checked. I am stumped as what to do next.