DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Load Center Location / Garage Door

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 01-10-2007, 09:34 AM  
Junior Member
Join Date: Dec 2006
Posts: 9
Default Load Center Location / Garage Door

I have a 34" wide wall next to my 7x9 garage door. Is there any distance that panel MUST be from garage door? A 14" wide panel will leave 10" on either side if mounted dead center of the wall. I could offset it up to 5" if nessessary but would look best centered. Meter socket & mast will be on outside of this wall. Meter socket is 8" wide so that leaves 13" to G. Door opening.
There are no windows nearby to worry about just the G. Door.


wannabebuilder is offline  
Reply With Quote
Old 01-12-2007, 06:41 PM  
Senior Member
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,483
Liked 259 Times on 220 Posts
Likes Given: 19


There is no requirement for a panel to be a certain distance from a door.
JoeD is offline  
Reply With Quote
Old 01-13-2007, 11:36 PM  
Senior Member
Join Date: Mar 2006
Posts: 2,990
Liked 4 Times on 4 Posts


Sounds like a plan to me, center up and charge!
glennjanie is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Basement Leaking at Front Door Location aanieze Bricks, Masonry and Concrete 21 11-24-2015 11:14 PM
Door Location remout General Home Improvement Discussion 6 10-22-2015 09:36 AM
Is this Garage interior door header load bearing? Ttownthomas Framing and Foundation 13 03-06-2015 03:53 PM
200A Load Center - Max Load? garlandkr Electrical and Wiring 12 10-26-2011 02:15 PM
2 breakers, 1 neutral, 14-3 wire coming from Load Center/panel kmham Electrical and Wiring 4 05-29-2011 09:13 PM

Newest Threads