Thanks!
With all due respect, we wouldn't need forums like this, if that's the extent of the feedback.
I'm just sayin'!
Thanks!... In this case, I would have used a carbide grout saw to speed up the process instead of the 3-4 hours he took with a razor knife (?) ... Instead of cheese cloth, I have used ordinary paper towels after misting the surface with a spray bottle ... wipe clean and toss the paper towel. Yu go thru a bunch but it goes faster and cleaner.
His additive is a nice touch. I wonder if that precludes using a grout sealer when you are done?
Post some pics of your before and after ... Would like to see your tile work!
Thanks!
And again, with all due respect, I'm not sure who this part of your reply was meant for but I'm still seeking helpful thoughts and direction on this project, thanks!
I was thinking the grout might need to be sealed afterwards The "marble guy" at HD Flooring dept. recommended the following:nealtw said:There isn't anymore sealing you do before grout...
The same guy at HD recommended the following:nealtw said:You will need a rubber trowel for putting it on and spange for clean up...
Thanks!nealtw said:Home Depot has a saw for removing grout
https://www.homedepot.ca/en/home/p.p...TyUaAul18P8HAQ
Enter your email address to join: