GFCI open neutral?

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blg002

Junior Member
Joined
Sep 16, 2014
Messages
12
Reaction score
1
I have a GFCI in my bathroom that has an "open neutral" according to the tester. However, only the top port (correct term?) has that error, if i apply horizontal pressure to the right side it reads "correct wiring", and both ports work (meaning a lamp plugged into either still turns on).

I'm wondering if maybe the GFCI is just bad? I was thinking of replacing it with one that has a built in night-light.

Some pics:

Bottom, good
IMG_3644.JPG


Top, bad
IMG_3645.JPG


Top, good w/ pressure
IMG_3646.JPG


Tester
IMG_3648.jpg
 
Looks like your outlet is wired ok. Something inside isn’t making contact unless you put some pressure on it. If your tester works fine everyplace else and you want a new outlet anyways I would say go for it and change it.
 
Looks like the contact inside the lower half of the receptacle is not making contact with the tester prong.
 

Latest posts

Back
Top