Have you seen this hinge?

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

barclaywsu

New Member
Joined
Apr 11, 2015
Messages
2
Reaction score
1
One of the hinges in the door of our bathroom vanity just failed and we need a replacement. The cabinet was already installed when we bought the house, so I don't know where it was purchased. It's a concealed frameless 165 degree opening hinge, stamped with part number 165A48, and I can't find it anywhere! Any suggestions on where we could find one?

It appears to be this hinge: http://www.nipomebeli.com/en/targovia_materiali/86/89/165A48.html but they don't ship to the US.

It's very similar to this hinge from Hickory Hardware (165A45) but the fastener holes are in a different place: http://www.hickoryhardware.com/p5120-14

hinge.jpg
 
Why post on at least three different DIY sites?
Question has been ansewered several times.
 
Hi Joe,

Thanks for noticing. I posted on 3 sites hoping to improve my chances of finding what I was looking for. I've gotten several responses but haven't yet found my hinge! Would still appreciate if anyone has suggestions.
 
Looks like a typical european hinge, commonly found at all hardware stores.
 
I wouldn't even be concerned that the holes are different. Just fill the old holes by snapping off a toothpick that you dipped in wood glue and pushed into the old holes. Mount the new hinge and screw it in. They're small screws and go in very easily.
 
For anyone looking to replace this part in the future, I suggest the Salice C2AFA99 hinge with B2V3H 0mm mounting plate. It took me a long time to find the right replacement for my own use, but I believe it should match the boring pattern OP needed.
 

Latest posts

Back
Top