Brick veneer pulling away b/c of termite damage

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nbwtf3

New Member
Joined
Apr 26, 2015
Messages
2
Reaction score
0
At corner of garage, termites compromised 3 studs and the 2x4 sole plate to the immediate left of garage door. Brick veneer on front of compromised area beginning to pull away. Cut away damaged wood and installed new sole plate and studs, helped reinforce with Grainger super strut channel angle brackets.

What can be done about the brick veneer?

Maybe fasten 2x4 across studs, hammer drill from inside, secure sleeve anchors with epoxy into brick veneer and bolt to cross 2x4?

Any ideas?

Thanks!
 
Hard to see what your trying to do from here without some pictures.
 
there were not brick ties attached to the old 2x4's ? if so, reattach brick ties to new 2x4's

if no brick ties. I have done this before

drainppppppppppppppppppppppppppppppppppppppnnnnnnnnnnnnnnnnn.jpg
 

Latest posts

Back
Top