DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decorating and Design > Poor Paint Trimmer




Reply
 
Thread Tools Search this Thread Display Modes
Old 05-04-2007, 03:33 PM  
rodduffy
Junior Member
 
Join Date: Jan 2007
Posts: 4
Default Poor Paint Trimmer

i try my best but i can never cut in paint between ceiling and baseboard. i always end up making a mess. i do use painting tape and it works fine until i have to remove it and make the final cut-ins. i have tried the edgers they sell but this has not helped me. i do not have a steady hand, and when i get close to edges, i always seem to go off-track. does anyone have a trick to help me ? thanks



__________________
rodduffy is offline  
 
Reply With Quote Quick reply to this message
Old 05-04-2007, 03:51 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

I prefer a tapered angle, sash brush; usually 3". Its not easy, it takes a lot of practice, but it can be done. I once knew an alcoholic who had the trembles all the time but he could do it. practice, practice, practice
Glennn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 05-04-2007, 03:57 PM  
rodduffy
Junior Member
 
Join Date: Jan 2007
Posts: 4
Default

thanks glenn
i'll sure give it a try.

__________________
rodduffy is offline  
 
Reply With Quote Quick reply to this message
Old 05-04-2007, 04:27 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,116
Liked 132 Times on 111 Posts
Likes Given: 338

Default Hmm....

I have used a very wide putty knife in areas of fine tuning. Seems to work good , you just need to keep the knife edge dry by wiping it off often.

__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 05-08-2007, 06:41 PM  
Homerepairnet
Guest
 
Posts: n/a
Default

Hello Rod,

When dipping the brush in the paint just dip the bristle edge. Wipe the edge that will meet the ceiling and tap the inside of the pot with the brush. That will keep the paint from dripping . Also, when going to "cut in" start about a half inch from the ceiling line and work your wat to the top. A few times doing this and you should get the hang of it. Good Luck!



__________________

Last edited by Square Eye; 05-08-2007 at 09:41 PM.
 
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Newest Threads

LATEST SPONSOR DEALS