DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Estimate, too high?

Thread Tools Search this Thread
Old 07-18-2007, 05:21 PM  
Junior Member
Join Date: Jul 2007
Posts: 1
Default Estimate, too high?

Im looking to repalce a window and a patio door. I went through Renewal By Anderson, and they gave me a price of $4,000.00 I know nothing about windows, so to me this seemed normal i guess... Everyone has said to me though that this is terribly high. Anderson would be replacing the window with another sliding window, and custom building the patio door to fill the existing sapce.

I have other estimates coming, but am becomin impatient because most of these other companies are rescheduling when to come out, or, not showing up at all.

I know Anderson is an expensive brand, but are there others out there that are just as good, and would bring my estimate down dramatically? The estiamte from Renewal by Anderson includes everything... Installation, trim work, hauling and disposing of old windows, permits, etc.


vintageawv is offline  
Reply With Quote
Old 10-04-2007, 03:04 AM  
Junior Member
Join Date: Oct 2007
Posts: 3

Like I've said before on other forums, shop around and get a few quotes. Also make sure you don't pay all the money until the job is done.

Just keep in mind that the cheapest quote may well be the most appealing, it certainly isn't always the best choice.

Windows (Double Glazing) by Zenith
SimonS is offline  
Reply With Quote
Old 10-04-2007, 08:38 AM  
Daryl in Nanoose
Senior Member
Daryl in Nanoose's Avatar
Join Date: Feb 2006
Location: Nanoose Bay, BC
Posts: 765
Liked 8 Times on 8 Posts
Likes Given: 5


It realy depends on the window and door you want and as soon as you say " Custom" the price goes way up. Also what all is invovled in doing this and how much travel time are all conciderations.
Daryl in Nanoose is offline  
Reply With Quote
Old 10-04-2007, 02:09 PM  
Barry M
Junior Member
Barry M's Avatar
Join Date: Sep 2007
Posts: 7

I agree with Daryl.

The fact that they have to custom build the patio door is probably the reason for the high price. For everything their doing including that, it really doesn't sound that high, but if its a concern just get more estimates but beware the ridiculously "low price" estimate.

Be sure that the contractor has insurance and its always very revealing to find out what their past customers are saying about them. Unless the contractor is trying to hide something he should make this information available to you with references and/or testimonials.
Providing Power Wash Services like Deck Cleaning, Roof Cleaning, and Other Pressure Wash Services
Barry M is offline  
Reply With Quote
Old 10-04-2007, 04:14 PM  
Senior Member
Join Date: Mar 2006
Posts: 2,990
Liked 4 Times on 4 Posts


Welcome to the Forum, Andy:
If you are talking about Andersen Window and Door, there is nothing in the world that can beat their products.
I have seen one presentation after another about windows and every one of them made the final statement, "They're just as good as Andersen". That's all I needed to hear.
glennjanie is offline  
Reply With Quote
Old 10-05-2007, 12:30 PM  
Senior Member
Join Date: Dec 2006
Posts: 331

American Craftsman is a company by Anderson. They sell at Home Depot and are reasonably inexpensive. I have 4 windows in my house and 2 more on the way. Most standard size windows double hung and casement with low E and argon run anywhere from $200 to $300 for vinyl.
cibula11 is offline  
Reply With Quote
Old 10-09-2007, 07:13 PM  
inspectorD's Avatar
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,435
Liked 245 Times on 197 Posts
Likes Given: 696

Default Hmmmm..

There is no perfect window....only a wall. But you cannot see anything.

Anderson is an above average product as windows go....there also is a great marketing team.
Then there are companies with better windows..and worse...and even terrible.
Going to the NFRC web site will help you in your decision on what to buy by getting educated about the product, however....the window "Always" depends on the installer to do it correctly. Spend all the money you want on the perfect window....but you better install it great or it will be a bad window.

Happy huntin
Just My
Made in the
inspectorD is offline  
Reply With Quote
Old 10-10-2007, 11:35 PM  
Rorrie Contracting
Junior Member
Join Date: Sep 2007
Posts: 2

$4000. sounds like a good price, anderson has a big name and you pay for it, but my experience with anderson makes the quality outweigh the cost.

Rorrie Contracting is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Building Deck high off ground guyod General Home Improvement Discussion 10 03-02-2012 11:14 PM
High limit problem on Trane XE90 Garvey HVAC 1 11-10-2011 09:33 AM
High efficiency furnace chimney liner Ducttapeman HVAC 3 04-15-2006 10:34 PM
Electrical usage in Houston-WAY TOO HIGH bandit69 Electrical and Wiring 2 03-24-2006 02:33 PM

Newest Threads