DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Question about Electric Wall Heaters




Reply
 
Thread Tools Search this Thread Display Modes
Old 12-27-2013, 09:26 AM  
pinkhammer21
Junior Member
registry_dropdown_32880_97671
 
Join Date: Dec 2013
Posts: 1
Default

I have baseboard heat with individual wall controls. I can only turn some on as even at lowest setting walls get hot. Most times have no heat turned on still says over 80. Leave for night with all turned off to find them on and walls hot. Now I turn off breaker so I stop overheating.there was a breaking with a note for a thermostat femtocell,what can I do, my usage is higher than apartments around me and shouldn't be.


pinkhammer21 is offline  
 
Reply With Quote
Old 12-27-2013, 12:50 PM  
Wuzzat?
Banned
registry_dropdown_17632_97680
 
Join Date: Jan 2010
Posts: 2,328
Liked 168 Times on 155 Posts
Likes Given: 94

Default

With a wristwatch and help from your PoCo you can use your electric meter as an ammeter/wattmeter and thereby check if these heaters are drawing the correct amps/watts (which are shown on the heater nameplate or you can ask the heater maker).


Wuzzat? is offline  
 
Reply With Quote
Old 12-27-2013, 12:59 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
registry_dropdown_17830_97682
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,425
Liked 463 Times on 357 Posts
Likes Given: 194

Default

The OP is just trying to get the house stabilized ... larger, more comprehensive solutions will have to wait.

MissJAE, here is a site which has a pretty comprehensive checklist for troubleshooting your unit. Go through this (find a friend to help?) and maybe you can get some heat so you can start working on a more permanent solution:

http://homerepair.about.com/od/heati...htr_repair.htm
CallMeVilla is online now  
 
Reply With Quote
Old 12-27-2013, 01:08 PM  
Wuzzat?
Banned
registry_dropdown_17632_97687
 
Join Date: Jan 2010
Posts: 2,328
Liked 168 Times on 155 Posts
Likes Given: 94

Default

That seems to be a common tradeoff: an expensive lump sum paid up front for a permanent solution or incremental solutions that nickel and dime you.

Looking farther into the future usually results in better decisions today. You can still choose the nickel and dime solution but at least you will be aware of the upsides and downsides of that choice.
Wuzzat? is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Load Bearing Wall question cruickshanks Framing and Foundation 6 12-18-2008 08:10 AM
Load Bearing Wall Question jkspup22 Framing and Foundation 2 07-12-2008 08:30 AM
Help! with old electric wall heaters! momma4sophia HVAC 3 05-31-2008 10:29 AM
BIG retaining wall is on its way out mjordant Bricks, Masonry and Concrete 5 05-11-2008 05:10 PM
Forced Air Electric Wall Heater zyggy HVAC 6 01-19-2008 06:12 PM

Newest Threads

LATEST SPONSOR DEALS