DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Rough Pourch Finish




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-04-2008, 10:11 AM  
mfank
Junior Member
registry_dropdown_7501_21474
 
Join Date: Aug 2008
Posts: 3
Default Rough Pourch Finish

My front pourch was recenly extended another 15'. The extension has a less than smooth finish. There are some trowel lines, and small things that make the surface look less than professional up close. Is there any way of fixing the surface of the concrete short of taking out the whole slab?


mfank is offline  
 
Reply With Quote
Old 08-04-2008, 11:20 AM  
glennjanie
Senior Member
registry_dropdown_630_21480
 
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie
Default

Welcome MFank:
Yes, it can be ground down with a machine from the rental store. There is one with 6 concrete grinding rocks on 2 rotating shafts. The rocks last longer and there is not any carcinogenic dust if you keep the floor wet while grinding.
Glenn


glennjanie is offline  
 
Reply With Quote
Old 08-09-2008, 11:29 AM  
mfank
Junior Member
registry_dropdown_7501_21600
 
Join Date: Aug 2008
Posts: 3
Default

How clean does the grinder make the surface look? And do you have any recommendations as to brands/make/models? Just to give me a start to see where I can rent one.

It was also suggested I could cover the concrete porch with another layer of concrete. Now knowing a bit about thermal expansion coefficients, I immediately thought this was a bad idea, but if the two materials bonded, and could act as one it may work. I figured I'd ask anyway.
mfank is offline  
 
Reply With Quote
Old 08-09-2008, 12:14 PM  
glennjanie
Senior Member
registry_dropdown_630_21601
 
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie
Default

Hello MFrank:
The grinder will make the rocks in the concrete show and make the finish almost slick but you will see the grinder's circular marks in it. Think of a Terrazo floor; that's how they make them. Or think of the road milling lines on a concrete highway where they have smoothed out a rough spot.
You may place new concrete on top of the whole thing; just make sure you clean the surface well first, use an epoxy bonding agent, and use at least 2" of additional concrete; anything thinner will pop off and crack.
Glenn
glennjanie is offline  
 
Reply With Quote
Old 08-09-2008, 01:23 PM  
mfank
Junior Member
registry_dropdown_7501_21603
 
Join Date: Aug 2008
Posts: 3
Default

The entire surface isn't horribly rough, it is just has a few high spots, and up against the house it is very rough. Is there a way to just grind these spots? Perhaps a smaller tool? And what about the spot near the house? We aren't thrilled at the possibility of having it multi colored.

I ask for small tools because the only thing I found was this. Granted there are more places I could try but this was the 1st and the closest I've found thus far.

http://catalogs.shoplocal.com/rscren...rcularid=12727

Last edited by mfank; 08-09-2008 at 01:48 PM.
mfank is offline  
 
Reply With Quote
Old 08-09-2008, 10:10 PM  
glennjanie
Senior Member
registry_dropdown_630_21606
 
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie
Default

I see what you mean, yes there is a smaller machine but the process goes very slow. You wouldn't want a small hand-held model.
You won't have a lot of multicolor, just multitextrue. Where you grind the trowel marks off will remove the 'soupy' part of the concrete and expose some stones.
You spoke of VERY rough near the house; are there rocks sticking up? You may want to rent an electric hammer with a busch head bit (looks like a meat tenderizer), it will cut the extreme rough stuff off quickly.
Glenn


glennjanie is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
fiberglass finish fiasco daniel2229 Windows and Doors 4 12-08-2012 01:26 PM
Finish on a soapstone countertop? patti87 General Home Improvement Discussion 3 10-19-2009 09:23 AM
Smoothing a rough concrete finish? marin guy Bricks, Masonry and Concrete 2 09-22-2008 02:45 PM
New cabinets with a chalky finish x37green Carpentry and Woodworking 7 12-04-2007 01:15 AM
Smoothing rough concrete slab WilliamC Framing and Foundation 1 02-19-2007 12:53 AM

Newest Threads

LATEST SPONSOR DEALS