DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Replacing a sliding glass door

Thread Tools Search this Thread Display Modes
Old 04-28-2006, 10:18 PM  
Join Date: Feb 2006
Posts: 62
Default Replacing a sliding glass door

I have replaced 2 sliding glass doors with French doors, and tomorrow is my third. But I cannot recall how wide the flange is on the sliding door that is nailed to the frame under the stucco. I have a masonry cut off wheel, and I will use that to cut the stucco around the door to remove it, and I cannot recall how far out from the door frame to cut. I think it is 1 1/2 inches around the perimeter. Can anyone confirm this, or make a suggestion how far out to cut. Thanks.

Outbacker is offline  
Reply With Quote
Old 06-06-2006, 02:16 PM  
Senior Member
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie

The flange I have seen most often is 1-1/2" but you never know for sure. Different brands may use a different size.
glennjanie is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Replacing Old Wooden Exterior Door with Steel Door pressureseal Windows and Doors 6 03-26-2012 11:51 AM
Realistic cost of replacing door and window? SavvyCat Windows and Doors 1 01-15-2009 01:16 PM
Replace sliding patio door Quattro Windows and Doors 15 10-16-2006 08:58 AM
Home Security TxBuilder General Home Improvement Discussion 1 10-11-2006 01:30 AM
condensation in sliding glass door WalterSobcheck Windows and Doors 17 08-05-2006 09:51 PM

Newest Threads