Ceiling Fan Remote Installation
I am currently adding a remote control to my Hunter fan. The fan is a listed in the installation guide as a Low Profile with lights type fan.
The remote is a Hunter brand remote that actually mounts in the location of the switch and is not a handheld remote.
Here is my problem. I have many wires and the instructions are just too vague for me to figure it out, so any help would be greatly appreciated.
Coming out of the ceiling-
- Green. It is definitely a ground wire because it attaches directly to a nut on the electrical box holding the fan to the ceiling.
Coming out of the Hunter fan-
-Black with stripe
- Green(I think)
Coming out of the receiver remote-
- Red for the light
- Black for the fan
- White common
- Black Hot
- White Neutral
Does anyone know which wires go together? The light and the fan do work and you can hear the remote receiver clicking when I push the buttons on the remote transmitter but nothing happens. The dip switches match.
Any advice would be appreciated