DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > 4x4 posts

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 11-30-2009, 06:18 PM  
Junior Member
Join Date: Nov 2009
Posts: 2
Default 4x4 posts

on my screened in porch, the 4x4 posts going from the header down to the slab were held in place by a metal clip on the bottom of the post..this clip goes underneath the post and most likely anchored into the concrete....the clips are now rusted out and the posts are ''floating' do you re -secure these posts without removing the screen framing ???

saltysenior is offline  
Reply With Quote
Old 12-01-2009, 01:30 PM  
Senior Member
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,735
Liked 245 Times on 207 Posts
Likes Given: 116


You can't. You'll have to attach new brackets to the post and drill into the concrete to secure them to the porch. You can use some angle or L-brackets to make the connection between the post and the cement surface.
kok328 is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Using SECURE SET foam on posts latelifebiker Decks & Patios 0 09-22-2011 02:38 PM
shifting posts Framing and Foundation 1 06-06-2009 09:02 PM
Posts P_Bowen Garage & Workshop Forum 2 09-22-2008 09:28 AM

Newest Threads