DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Bricks, Masonry and Concrete > Concrete fence

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 06-08-2010, 06:00 AM  
Junior Member
Join Date: Jun 2010
Posts: 2
Default Concrete fence

Holy crap just discovered this site 4 minutes ago and well pleased about it . Bought my first home and have been slowly molding a modern industrial theme...vintage gym locker panels in kitchen, a few select Eames and Steel Case pieces, etc. Anways now ive taken to concrete, texture and all things re-purposed. Welding, raw metals, as well. Tax refund allocated to a full prop fence and bathroom update.

Project: Outdoor Fence thats modern, industrial, commercial even, constructed from materials not typically associated with what most relate to when thinking of a fence.

Getting to my point or trying to anyway... tried to figure a way to economically work a modern Gabion Fence (viewed here but price found to be way out of my budget. The firm that did that one for a HDTV project estimated $60K for that beauty. My new angst is this...envision the typical boring vertical wood slat/embedded post 5-6 ft high...but my posts made of concrete and slightly thicker, square pillar set into ground same way the 4x4 posts are. Spaced out evenly every 10 ft or whatever, horizontally running one on top the other the "fence" wall that will contain my dogs utilizing reclaimed iron or steel beams or "strips" 4 inch wide x 1/2 thick or whatever, running horizontally with some amount of gap one on top of the other, and those secured to the concrete posts via steel "coupler" not sure if term is correct, but think plumbing pipe and the brackets u used to attached end to end...only that matches whatever steel solution I go with, ibeam, girder, beam, flat strips, who knows. The idea for this originated from this modern fence DIY network showcased


which is 2x4's, 4x4 posts cemented into ground and running horizontal is galvanized piping secured into the wood by routed out holes, 10 ft sections at a time.

I see the steel being bluish, blackish, maybe rusted here or there, something raw, earthy, flat. Reclaimed train rails... would be so cool. And the concrete posts maybe grinded for some texture, possibly colored slightly.

This project like most other projects is a work in project and is tweaked with all the time...train rails a few ago is a good example. Anyway hopefully i have managed to instill the look or vision ive been running with for this fence, and handed it off to any whom have experience with metals, concrete, contracting etc. If so your for sure thinking "when that fence is done, a section will be taken to be permanently displayed within the Museum of Modern Art or the Muskegon" hahaha

OK so that being said...IS A FENCE LIKE THAT POSSIBLE? FEASIBLE? Create the concrete posts via melamine molds like i have seen House Crashers and a few of the other DIY progs utilize. Where to source the metal?

These are the questions I have and coming from someone having discovered DIY only a few months ago and tho has fast tracked a ton of knowledge and still very the questions stage to eventually with time, spill over into the answers stage, where many of you already are.

So umm, hadnt planned to post the great american novel here. But I did anway.

Im Robert.

Mooninite is offline  
Reply With Quote
Old 06-08-2010, 11:47 AM  
inspectorD's Avatar
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,490
Liked 264 Times on 208 Posts
Likes Given: 772

Default well

I'm sorry to tell you Robert, But you can do anything you want to...and we will give some free advice.
We also like pictures and drawings.Welcome aboard.
Just My
Made in the
inspectorD is offline  
Reply With Quote
Old 06-09-2010, 11:51 AM  
Senior Member
handyguys's Avatar
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 2 Times on 2 Posts


Personally, I wouldnt do it. Its not my astetic. Think about resale, if you are not going to be in the house for a long, long, long time then dont do it.

Okay, if I was going to do what you sugegsted I would go in these steps.
1) first determine if a fence permit is required and what the fence requirements may be (height, materials, setback, etc). Assuming the government will let you do what you want...
2) decide on, and source, the horizontal materials first. Lets assume old train rails.

Train rails are very heavy. Very very heavy.

You will need to create a mold for your concrete posts but do it in such a way the rails can be inserted later. You are sort of making

out of concrete but for your train rails.

You could then set these like normal fence posts and then insert the rails.

Oh, and I hope you have lots of friends or some heavy equipment
The Handyguys Podcast
handyguys is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
The wrong way to anchor fence posts in concrete jjmartin1340 General Home Improvement Discussion 20 05-19-2015 07:54 PM
Concrete prob. - fence post base - gravel walkway Elemental General Home Improvement Discussion 2 05-06-2014 10:33 PM
how much does block concrete fence cost? ann123 Bricks, Masonry and Concrete 33 04-30-2014 01:57 PM
Hi from Jay Fence Fencefence Introductions 0 08-11-2009 12:27 PM
Fence? ponch37300 General Home Improvement Discussion 4 05-06-2008 12:39 PM

Newest Threads