Cut license plates
- Thread starter dthornton
- Start date
Help Support House Repair Talk:
joecaption
Well-Known Member
- Joined
- Jan 8, 2011
- Messages
- 2,599
- Reaction score
- 496
nealtw
Contractor retired
We do want to see when done. Better be good we are a picky bunch:trophy:
LOL. Neal, I WILL, but its gonna be a while. Im still looking for a (reasonable priced) US map (like the wall maps we used to have in school) with well defined state outlines; about 3 X 5 in size (MOL). Any ideas? Not sure how good it will be, but I will do my best!
Joe, I already have a good set of snips, but I dont want to bend the metal. Besides, some of the states are small and have intricate outlines, which I dont have the skill to do with snips. Thank you though for the suggestion.
Snoonyb, this sounds like a good idea, but why from the reverse side (and do I attach the blade backwards?). I have a scroll saw that uses the 6 pinned blades.
The revers side is usually not painted, just plated.
Scroll saw blades are available in two configurations, those that push the material away from the shoe, and those that pull the material against the shoe, the latter is preferred.
Scroll saw blades are available in two configurations, those that push the material away from the shoe, and those that pull the material against the shoe, the latter is preferred.
slownsteady
Well-Known Member
If the teeth of the blade exit from the painted side, they will chip the paint.
nealtw
Contractor retired
You can get any kind of blade for a scroll saw
https://www.google.ca/search?q=scro...odTZAhVK7GMKHZlvC5gQ_AUICigB&biw=1898&bih=950
