LMHmedchem
Well-Known Member
- Joined
- Aug 20, 2012
- Messages
- 92
- Reaction score
- 5
Hello,
I have cleaned and lubricated the door hardware and the door moves up and down easily by hand. When I push the wall button, the door moves a few inches and then stops like its jammed. I unplugged the unit and let it set for a few minutes but when I try to reprogram the limits, I get the same thing.
The plastic carriage that engages the drive belt seems to move a bit cockeyed when the door starts moving. It looks like that is where it is getting jammed but the door moves perfectly fine by hand. I don't know if the screw drive needs to be lubricated or if the force settings are off, or what.
This is the owners manual for the model I have,
https://www.geniecompany.com/data/products/genie_owners-manual_eng.pdf
I can post pictures, but I have no idea of what at this point.
Suggestions would be greatly appreciated.
LMHmedchem
I have cleaned and lubricated the door hardware and the door moves up and down easily by hand. When I push the wall button, the door moves a few inches and then stops like its jammed. I unplugged the unit and let it set for a few minutes but when I try to reprogram the limits, I get the same thing.
The plastic carriage that engages the drive belt seems to move a bit cockeyed when the door starts moving. It looks like that is where it is getting jammed but the door moves perfectly fine by hand. I don't know if the screw drive needs to be lubricated or if the force settings are off, or what.
This is the owners manual for the model I have,
https://www.geniecompany.com/data/products/genie_owners-manual_eng.pdf
I can post pictures, but I have no idea of what at this point.
Suggestions would be greatly appreciated.
LMHmedchem