Billbill84's Recent Activity

Help Support House Repair Talk by donating:

  1. Billbill84 replied to the thread What is this staining on can lights?!?.

    Thanks for all info guys I really appreciate it. As of now, I'm not going to seal up anything until I monitor it throughout the seasons...

    Nov 18, 2019 at 1:04 PM
  2. Billbill84 liked pjones's post in the thread What is this staining on can lights?!?.

    I’m aware of the thermal safety. Unless it’s some knockoff allibaba purchase then it should have one. But then you are relying on that...

    Nov 18, 2019 at 1:02 PM
  3. Billbill84 liked Sparky617's post in the thread What is this staining on can lights?!?.

    What would happen is the thermal cut out would trip, it would cool down, the lights would come back on, until it trips again. It would...

    Nov 18, 2019 at 1:02 PM
  4. Billbill84 replied to the thread What is this staining on can lights?!?.

    What is the exact fire hazard? I don't think I'm gonna seal anything up until I know for sure and I was here last summer and winter and...

    Nov 17, 2019 at 9:02 PM
  5. Billbill84 attached a file to the thread Idea help to heat/insulate this bathroom !!!.

    True. Here's some better "internal"pics combined with all the others to get a better reference. FYI that temp gun shot a temp of 27...

    IMG_1155.JPG IMG_1156.JPG IMG_1158.JPG IMG_1159.JPG IMG_1160.JPG IMG_1162.JPG IMG_1163.JPG IMG_1164.jpg IMG_1165.jpg IMG_1166.PNG Nov 16, 2019 at 2:30 AM
  6. Billbill84 attached a file to the thread Idea help to heat/insulate this bathroom !!!.

    Hey guys. So upon submitting this case to a contractor acquaintance of mine he agreed with everything said here but also said he was...

    IMG_1145.jpg Nov 15, 2019 at 3:18 AM
  7. Billbill84 liked Gary's post in the thread Idea help to heat/insulate this bathroom !!!.

    A cheap inspection camera could be made by using a selfie stick, purchased or home made. Set your cell phone on video and get as many...

    Nov 15, 2019 at 2:30 AM
  8. Billbill84 liked nealtw's post in the thread Idea help to heat/insulate this bathroom !!!.

    If it is OSB take a hammer up there and make a hole big enough to put your phone in and take a few pictures. If you hit it hard enough,...

    Nov 15, 2019 at 2:30 AM
  9. Billbill84 replied to the thread Idea help to heat/insulate this bathroom !!!.

    How would I go about acquiring one of them cameras? Do they have a small light on them too?

    Nov 14, 2019 at 4:11 PM
  10. Billbill84 replied to the thread Idea help to heat/insulate this bathroom !!!.

    Ehh that staircase runs up the center of the house, the problem area is way up in front of house. Imagine you're standing at top of...

    Nov 14, 2019 at 2:13 AM
  11. Billbill84 replied to the thread Idea help to heat/insulate this bathroom !!!.

    Good to know thank you! I will have to post a couple pics of the inside of garage vs that outter valley slope. I think where the inside...

    Nov 14, 2019 at 1:34 AM
  12. Billbill84 liked nealtw's post in the thread Idea help to heat/insulate this bathroom !!!.

    If you have a 3 or 4 inch hole saw I would use that first, if they used a valley set there , you won't get much of a hole This what a...

    bil 5.png Nov 14, 2019 at 1:29 AM
  13. Billbill84 attached a file to the thread Idea help to heat/insulate this bathroom !!!.

    Ha! I was also wondering about that little slope on the exterior it's very suspicious in this case. There's no entry point to it BUT if...

    IMG_1129.PNG Nov 14, 2019 at 12:39 AM
  14. Billbill84 liked zannej's post in the thread Idea help to heat/insulate this bathroom !!!.

    Would heating the garage somehow help? My only thought other than that is to add space heaters (which is not ideal). Wish I could be of...

    Nov 14, 2019 at 12:27 AM
  15. Billbill84 liked nealtw's post in the thread Idea help to heat/insulate this bathroom !!!.

    There is likely a 2 or 3 ply girder truss about 3 to 4 ft high and the rest of that wall is built on top of that . More insulation...

    Nov 14, 2019 at 12:26 AM