maxdad118's latest activity
Help Support House Repair Talk:
-
maxdad118 reacted to bud16415's post in the thread Bathroom fan with light with only 14/2 wiring with
Like.
I would just wire the fan and light together and that way you know people turn on the fan. If you want to leave it on in the auto fan... -
If your primary voltage checks out but, not the secondary voltage then you have a bad transformer. Yea I know it brand new but, it's bad.
-
maxdad118 reacted to Guzzle's post in the thread Using rafter ties as base for storage in 1950’s house with Like.
You might have the option of thru-bolting plates on the ends of the 2x4s. The corps who make this things can advise you on the fastener...
-
maxdad118 replied to the thread No heat! Bad control?.Problem resolved, bad gas control. $76 on Amazon and about 20 minutes to swap it out
-
not much to go on here. how's the flame sensor and spark ignitor? Clean the sensor an see if that helps until the part can be replaced...
-
maxdad118 replied to the thread No heat! Bad control?.Flame sensor needs a flame and I don’t have an opening gas control to get a flame
-
maxdad118 replied to the thread No heat! Bad control?.Video
-
Hello, my Goodman faf stopped heating. I’m getting 24+ Volts at control and vac switch checked ok. What do you think? It’s about 10...
-
maxdad118 replied to the thread LG LRG3095ST/02 gas range F11 heat error, temperature sensor, ignitor, control board, or something else.I bet it does, try it! You won’t hurt anything. There should be a part number on the igniter itself. Norton is usually the brand or...
-
maxdad118 reacted to LMHmedchem's post in the thread LG LRG3095ST/02 gas range F11 heat error, temperature sensor, ignitor, control board, or something else with Like.
Do you know if the broiler uses the exact same part for the ignitor or a different part? Repairclinic.com doesn't seem to list a...
-
maxdad118 replied to the thread LG LRG3095ST/02 gas range F11 heat error, temperature sensor, ignitor, control board, or something else.The reason the broiler igniter hasn’t failed yet is because it seldom used compared to the oven.
-
maxdad118 reacted to LMHmedchem's post in the thread LG LRG3095ST/02 gas range F11 heat error, temperature sensor, ignitor, control board, or something else with Like.
I believe that the broiler has its own ignitor since it has always worked with no issues. In the end, I did the repair based on this...