oldognewtrick's latest activity

Congratulations!

It is official as of today we are in first place in the snowfall. We are 5.5” ahead of our down the road neighbor Buffalo NY. More...

Test your plug for continunity, if the plugs bad, send me a private message and I'll mail you one. I have several.

Get a live trap and introduce them to a new zipcode.

How many drywall blades do you have? 6-9-12 work well. Start with the 6, sand, 9 sand 12 to finish. The smoother you get it when...

Nicely done, turned put great. Now, all you need to do is paint a door and door frame on the wall, screw on an old doorknob and have a...

Here is the finished steps. It worked out really well. We finished the project this weekend, added the counter to the cabinet and filled...

Cutting the drywall will be much easier than removing the vapor barrier, insulation and moving the studs. It will require more material.

What type of "snake" did he use? I've had better luck with a water jet than a metal mechanical snake.

I'm fixing to do the exact same thing soon.

I have several strands of those that we use when we go camping to make a perimeter around the campsite. Make sure you have the plug in...

Too bad inspectorD isn't hanging around anymore. He used to run syrup lines in the fall.

https://www.energyvanguard.com/blog/3-reasons-to-remove-attic-floor-insulation-in-a-spray-foam-attic

I've been to many houses over the years that have been spray foamed, it's always done on the underneath side of the roof deck. They...

https://www.tractorsupply.com/tsc/product/4-ft-x-6-ft-x-3-4-in-thick-rubber-stall-mat-2219003?store=500&cm_mmc=feed-_-GoogleShopping-_-Pr...