ShellbackBill
Active Member
- Joined
- Apr 10, 2017
- Messages
- 34
- Reaction score
- 11
Installing a new alcove tub in my fixer upper.
Instructions say, build a 60 in opening.
Drawings show a 60 in opening.
I built a 60 inch opening.
Tub is exactly 60 inches. Which means it wont fit.
Looks like I can move the wall at the foot of the tub with a little careful work with a demolition saw.
I had assumed that if the instructions call for 60 inches, then the tub would be 59.5, or something less than 60.
Where did I go wrong?
Instructions say, build a 60 in opening.
Drawings show a 60 in opening.
I built a 60 inch opening.
Tub is exactly 60 inches. Which means it wont fit.
Looks like I can move the wall at the foot of the tub with a little careful work with a demolition saw.
I had assumed that if the instructions call for 60 inches, then the tub would be 59.5, or something less than 60.
Where did I go wrong?
Last edited:
