welcome to the doghouse

I guess MG got the Mustang done, rode off into the sunset and forgot all about us......

...or he is broke down in the jeep somewhere and trying to get back home?

I have been checking in occasionally. but that never to be sufficiently damned photobucket fiasco has me pretty much defeated when it comes to forums. all my pictures and how to's and build threads are all going to be useless after the first of the year, so I have not felt much like posting anything else. I am still working on the jeep and the stangs. the new new supercharger is working great. it is unfortunately causing some issues in the transmission. I don't know what is going on, but it seems first gear is slipping a bit. I am going to have to do some diagnostics. I also do not really like the way it shifts. it is just way to agressive. I think I want a more stock feel. I am trying to decide if I want to swap the valve body or what I want to do with it, but I am going to pull it soon.

as far as the jeep goes, I let my daughter take it camping last weekend and it rained like crazy. I had the bikini top on it. and she did not put the storm cover on it, so everything got soaked. I had put carpet in it for when she was driving it in the winter, but with this rainstorm I lifted the carpet and looked under it and it was starting to show some rust through the old bed liner so I pulled the carpet and it looks like the prior owner did not prep the floor at all before putting the bedliner down. it just peeled out like saran wrap. so I stripped it down with a 3 inch sander and got rid of all the old bed liner. then I painted it with rust encapsulator and then put down some new bedliner. I pulled the body plugs out and drilled a couple new holes where the water was pooling so hopefully that will keep the floor from rusting out the next time that happens. then I took it for a short drive and it started running rough like it had done before. the local mechanic I used had fixed it, however he apparently had not anchored the harness wire out of the way sufficiently because when I checked out the cps I found the wire had touched the header again. so I wiggled the wires and could not get it to start. so I had to tow it back to the shop. I will have to order a new cps tomorrow. then make sure the wires can't touch the header again. anyway I am still alive and still checking the forums so I will try to get over my current funk and start just uploading pictures to the forum.

:yellowjeep: swapped out the crank sensor and had to check with the hesco forum to figure out the air gap. gapped it to .050 and ran the wires in a better way and re wrapped the loom wires with electrical tape and fired it up. it is running like new again.

Move all your stuff to another free hosting site.

Or upload to your computer, then download to the sites?

I probably have a thousand pictures on my computer and backed up on flash drives.

Here is what I have just for my pictures.

10,821 Files, 110 Folders

Total: 15GB

yes, I have all the pictures on my computer. that is not the issue. it is that all the links in my threads will show that stupid logo of theirs in a couple months and in order to fix them I have to go back through, and find the pictures and then load them for each site. no it is not impossible, but there are a lot of pictures I have linked. anyway. I am just frustrated by the whole thing.

That's what they want. You become frustrated and pay the monthly fee.

yeah but 400 dollars a year. that is ridiculous

I M G U R without the spaces is free . I have hundreds on there ..

Seriously they want 400 a year? I would never pay that

yeah I was willing to pay the 30 dollars a year for the 5 gb plan and had done that for a couple years but no way was I going to pay 400