I just use a knife.
The joists will be roughly 4 feet long, running perpendicular to the trailer. The deck will be in 4x8 sections so if it needs to be moved, I can...
I am willing to have more deck blocks to support it, but I need the deck to be built as light as possible.
I am trying to do this "on the cheap" So, what lets me use the least amount of board feet?
If I want to stick with 16'' on centre, 45 is not the way to go?
16 inches on centre joists. Sounds to me, 45 would be the best go.
Today I had to level something in the bathroom. I did not feel like going and getting my level, sso, I put some water in a cup and used it.
I am planning on building a deck for my RV. It is not located anywhere that building codes apply.
It will be 8 feet by length of trailer.
It will be freestanding.
I have checked and anything under 2 feet high does not need a permit.
I am not putting a footing in.
I plan to build a deck , but i want to make it as low to the ground as practical. Legally, I can go a max of 23 inches before a permit is needed....
That's a good option. The more I think about it,t he more a text message to my phone would be ideal.
I had a scare today. I own a semi, and my neighbour messaged me today while I was at work that she had water coming in her basement. Since no one...
It was lack of insulation around the bathroom fan vent line.
Beer stays in the fridge till we are done. I am not wanting to rent a lift.
I am guessing that water got into the fixture and caused corrosion that was causing the bulbs to blow.
OP here. Light fixture is changed out.
I decided to do what one person suggested and trip the main breaker. Better safe than sorry.
The fixture was working fine, then we noticed that the bulb burnt out. Then it would simply blow the new one instantly. So, to me, it sounds like...
No it does not vibrate. I tried a CFL and an LED. Lights for less than a second and then pops. What is Romex?
I would rather not kill the power...
The bulb is burnt out and for some reason, the bulbs keep blowing. That is why I am replacing the fixture.
Separate names with a comma.