Hard to see into that dark box.
If your saying you unconnected it from the wire nut, then reconnect it and don't worry about it.
Most likely a...
Should be a print on the back of the panel that you remove to gain access to inside the cabinet.
Didn't watch the video and not sure what's being wired up but, I believe your asking how to maintain polarity when splicing an unmarked power...
I agree. Looking at the post further away, it appears to attached to the fascia, no load, just a way to attach the top of the trellis to...
Does your touch screen unit have an "Auto" setting?
I run a 34F "Differential" with a 1F "Offset".
That is what we call in the trades "dumb dumb".
It's a sealant/insulation.
You don't want to remove it.
Sounds like a Lennox. I hate the setup you've describe for the very reason that your having.
Yea, the water finds its way around the coil but...
Thinking it might be Ok if the door flap is sealed airtight and made of a fire rated material if not the existing drywall piece.
Usually, the most direct/shortest route possible.
Is the drain pain on the negative or positive side of the static pressure in the cabinet?
Is there a P-trap installed on the condensate drain line?
Spring time is booked with startups and preventive maintenance.
Summer is booked with repair/replacements.
Fall is slow but, you want to have your...
Insulate the supply duct and see what happens.
It's not frosted like a refrigerant leak, it just looks like water. Is that normal? Yes. Any cool metal exposed to moisture laden air will cause...
Adjust your "travel" and "force". Back off on both until it stays closed.
Doesn't matter which motor we are talking about, they both require 24VAC at the relay to run the motor.
If your only seeing 19VAC then replace the...
In my neck of the woods, black pipe not galv. would be required.
I believe local code supersedes NEC. What's your locality?
How long is the run?
May have seen this on one of those DIY websites of hacks.
Worst case scenario is that the cardboard would become laden with grease, the weight of...
Totally possible if the water froze before drying.
Looking for some advice. A few years ago I treated my wood deck with Cabot's solid color water repellent.
The color has faded and/or...
Separate names with a comma.