Look at the bottom of the individual links, there is a twist, cut it off or open it with a plier, unwind the strand and move to the next location.
Nope, unless the conductors feeding that recep. are not 12ga.
Pictures are of 2 different service masts.
What's your point?
Also, ask why.
Or a bird feeder, or maybe a Halloween toy.
You could be a bit more expansive about the intent.
As Neil has provided examples of, there are several alternatives to the MAG vent system that will fit your configuration.
It's "built to code", to protect the flex-i-duct, and no other reason.
Had they used round steel venting material as I listed, they would not...
If the box is removed and round sheetmetal ducting is used, with a fiberglass sleeve, and there is fire caulking on both sides of the wall...
Since I vent with metal ducting, I would remove the box completely and vent with 4" round steel venting, wrapped with fiberglass duct wrap, sealed...
Depending upon the age of the valve, as bud says, the gate can stick, also the threds on the stem controlling the gate can deteriorate, leaving...
Which type of valve are they?
Have you contacted these folks; http://www.nutone.com/nutone-customer-technical-service-support/contact-nutone-parts-online
There is a...
"You'll need an inexpensive VOM, (volt, ohm meter), to better understand what you are attempting to service."
It could have come from anywhere....
The switch that remains connected may well be for the light and the two black conductors on the left are probably for the recep. that the...
There is a good chance that you will have to contact a distributor, to find an extruder, for that material.
Is this related to a door, window or roof?
You purchase the faucet, and in the package will be plastic plate used for the rough-in. That is the size that the cutout needs to be, and it is...
Separate names with a comma.