Search results

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. shecandoit22

    Nail Gun question

    Hello milkman2010, If adjusting the air pressure doesn't work then my next step would be to adjust the depth of drive adjustment dial. On one of my nail guns it's located right under the trigger and one of the other ones it's located on the front of the nail gun towards the bottom(tip)...
  2. shecandoit22

    Wooden Kitchen Table - Heat Mark Removal

    Hello again stelit, Shecandoit22 here. I am so glad that it worked out for you. If it has a coat of poly already on it I would try and rub the spot out with 000 or 0000 steel wool before I would add another coat of poly. I use the steel wool in between coats of poly to smooth it out. So I...
  3. shecandoit22

    Wooden Kitchen Table - Heat Mark Removal

    Hello Stelit, This is Shecandoit22 from Home Depot. Great news this can be fixed with an Iron and thin white cloth. I know it sound weird but it really works. All you have to do is set the iron to medium heat and on the steam setting. Cover the white spot with the thin white cloth and then...
  4. shecandoit22

    Kitchen drawer

    Well I found what looks like the same part but it looks like you have to purchase the side of the drawer also. They are metal drawer sides with an adjustable front plate. I believe that the adjustable front plate is the part your looking for. I just googled images of adjustable metal drawer and...
  5. shecandoit22

    Staircase for loft bed out of 1x12?

    If you built it with the drawers pulling out of the end of the bed instead of the face of the stairs you would be able to use the 1x pine that you were wanting to. It would give you more options for the width of the drawers also.
  6. shecandoit22

    Granite Gap

    Hello Mhoward60, I would do one of two things. Either use what is called a foam rod gap filler first and then caulk it with corresponding color or you could use a piece of scribe molding and scribe it to match the wall. You may have to stack a couple pieces of molding to get the correct width...
  7. shecandoit22

    tricks or tips on hanging cabinets

    Hello bwhit, I agree with going onto google and doing some research. I work for Home Depot and I have heard some really crazy stories from people that tried to install their own cabinets. Here is a link that has a few videos that might help you. I prefer seeing something done as well as reading...
  8. shecandoit22

    Replacement door gasket

    Hello CageyB, I am a Home Depot associate, trained and authorized to help people on the internet. Don't worry your not the only one with this problem. I have heard the same issue many times in the store. Have you tried to figure out what manufacture made the door? If you can figure that out...
  9. shecandoit22

    Convert sliding doors to hinged doors?

    Hello jimmc, I am a Home Depot associate, trained and authorized to help people on the internet. I think it is very possible to convert the doors from sliding to hinged. It looks like you can just remove the bottom tracks and add in a solid piece of wood so that it would fill the entire...
Back
Top