Search results

The original flex duct insulation has split in many of the sections and some are actually leaking.

I need to replace the flex duct in my crawl space and looking for any helpful info I can get. What R value? The more the better? When to use foil tape vs mastic? Should I replace the insulation wrapped around the plenum? Thanks for your feedback!

I recently had a sun room constructed over a newly poured raised concrete slab. The concrete has a lightly brushed surface. I want to retain the lightly roughened surface of the concrete. Is there a type of concrete coating (stain/sealer, paint or epoxy) that would not result in a smooth finish?

Great feedback folks! Thanks again.

Sounds like a slab foundation would be the way to go but then I would be concerned about addressing any potential plumbing issues in the future.

Thanks again for everyones feedback!

I am considering concrete flooring in a new single story home. I am leaning to having a crawl space vs slab and was wondering if a standard wooden subfloor/joists would support a concrete floor? Thanks in advance for the feedback.

Hi Jeff, I described the problem incorrectly. The dryer drys at a high temp even when the temp selector is set to a low temp.

My GE dryer (model DBXR463ED2WW) drys at a high temp even when the temp selector is set to a low temp. Is this a thermostat prob? I have searched and found a high limit thermo and cycling thermo. Do I need to replace both of just one or is this prob from something all together different? Thanks...

Dye (blue) test on both toilets resulted in light blue water in bowls, so I'll be replacing the flappers next. Question about flapper design/fit, should part of flapper that protrudes into the water outlet be the same approximate diameter as the outlet? Currently, the diameter of both flappers...

Have not done the dye test yet but plan to. I did use the clip to attach the refill tube to the overflow pipe so no siphoning is taking place.

Are you referring to adjusting the height of the fill value unit vertically? I have it mounted so that the ring is at least 1 inch above the overflow pipe per the instructions.

I recently (2 months) replaced both fill and flush valves in 2 toilets with Fluidmaster products. A week ago I noticed both toilets fill valves are turning on even though the water level in the tank is at the full mark. (Note: the water level at the full mark is below the overflow tube.) The...

I have scrapped/sanded the exterior windows on a 50+ year old brick house in prep for painting. About 50% of the old paint has been removed down to the bare wood. If I paint the windows as they are now, the finish would not be very smooth. Would it be advisable to use a chemical paint stripper...

I have run a bead of silicone b/w the tub base and tile floor. Pretty sure it is coming from the floor just outside the tub. I poured a small amount of water (4oz) on the floor in the suspected area and by the time I could crawl under the tub in the crawl space(apprx 5 mins), the majority of the...

I would like to waterproof the tile floor in the bathroom of a 50 year old home. This is to prevent any additional waterdamage to the subfloor/floor joists. I tried several applications of sealant product but water still leaks through to the crawl space. I installed a shower door but the tenants...

Thanks for the feedback everyone. What can be done at this point to prevent further cracking/shifting of the brick above the front porch?

Sorry but I intended for the 2nd pic to be of the window above the front porch. Note the shifting of the brick under the window.

This house is apprx 17 years old. The foundation rests on clay soil. There are no cracks in the sheetrock in any rooms and all windows and doors open without binding. All cracks are adjacent to 2nd floor windows. Could there be any reason other than foundation settling that has caused these...