Search results

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Cheap garage ceiling ideas?

    The code would all depend on where you live. Just hang the drywall, you thank yourself in the long run.... Fire tape it quick and be done with it if you're not concerned how it looks. It would be about the same cost as the $7 you mentioned.
  2. M

    Bubbling and falling wall texture

    I have done a lot of this kind of work. I would say your main problem is probably glue left over from the wall paper although I cant be 100% certain. How I prevent this from happening is skimming the entire wall with durabond. I can't say it enough, but durabond is a life saver in most...
  3. M

    Pattern dry wall repair

    You should consider using durabond to repair this. With durabond you reduce your risk of it bubbling and pealing anymore than what it already has.
  4. M

    How to repair the ceiling board from other side due to wet?

    If you can see the water stain on the ceiling from the laundry room there was more water damage done to more than just the paper. As previously stated I highly recommend cutting out the section and replacing it. If you have smooth ceilings it would be easier than textured ceilings. If you want...
  5. M

    Re-Texturing Question

    You are correct. I would suggest informing people of this contractor because he obviously has no idea what he is doing, or (and probably most likely) was just trying to scam you out of some hours on the job. What kind of texture do you have on your walls now and what were you looking for him to...
  6. M

    Drywall joint...tape or no tape?

    Yes, you should tape the crack. You may want to fill it in with durabond first before taping it. Also, I would recommend using the durabond on the corner bead as well since it looks like it is in rough shape. When you skim the bead it should take care of that nasty butt joint you will have...
  7. M

    Corner beads?

    In my opinion it is always best to cut the corner beads at a 45* angle so no metal overlaps metal. That way you can also get your corners to touch with no gaps. Also, I would never ever use screws on corner beads. They tend to bend and crinkle if over tightened, it's a bad idea. If you would...
Back
Top