I am familar that brick molding can be readily purchased. By other trim I mean the other wood around the door behind the brick molding and the trim wood between the 2 doors. I have looked a Lowes and Home depot and do not find wood of same sizes. Would I have to improvise and cut wood to suit?
The model number is hard to read but appeares to be FWS845QGS2. I really don't think it siphoning out as it always fills on the wash cycle and sometimes on the rinse cycle. It actually sounds like you can here the drain open. Some times it will fill all the way and work fine and other times it...
I have a 10 year old Frigidair washer that has a problem. It fills fine during the wash cycle but during the rinse cycle most of the time the water starts to drain before the tub has filled. This causes the water to continue to run. Can any one help?
I'm not sure but I think the problem is solved. It has worked OK since Saturday
Feb. 25. I noticed a sag in the vent pipe of about 2 and a half inches in the last 15 feet from where it exited the house. It is run thru a side wall. I mounted the pipe solidly in line with the pitch of the rest of...
Thanks for all your information. I am sure the flue is clear as the exhaust fan puts out a lot of air. I don't know what Trane specifies but the vent I.D. is 2 inchs which matches the exhaust outlet. It is about 35 feet long.The blower motor run freely. and the tube is not plugged up. You can...
I have what I have found by searching other forums is a fairly common problem with a Trane XE90 furnace, I get a code when it dose'nt ignite (3flashes of a led) that shows the pressure switch is stuck open. Some times the furnace lites fine with no problem. Other times it will run the exhaust...