5/16" unions

Discussion in 'General Appliance Discussion' started by Johnboy555, Nov 16, 2009.

  1. Nov 16, 2009 #1

    Johnboy555

    Johnboy555

    Johnboy555

    Well-Known Member

    Joined:
    Dec 31, 2007
    Messages:
    52
    Likes Received:
    0
    Hey there!!

    1st.. I am a handyman, have been for the last 35 years...

    So... the water cooler (snake shaped plastic container in fridge compartment) has developed a hairline crack. That's not the problem though, I've repaired that, BUT the lines that I cut to remove it are 5/16" lines and I can find no where to find connectors to re-attach the lines. It's easy to fine 1/4" or 3/8" but can find nowhere for the 5/16". They are poly lines and I was hoping to find the "push-in" connectors, but anything that will work is fine.

    Any contacts Guys???

    The peoplethat design these appliances really suck when they do this.
    I could go on but I will spare you!

    Thanks,
    Johnboy
     
    Last edited: Nov 16, 2009
  2. Dec 20, 2009 #2

    jeff1

    jeff1

    jeff1

    Well-Known Member

    Joined:
    Mar 17, 2006
    Messages:
    465
    Likes Received:
    34

Share This Page