add shower to 30's era bathtub?

Discussion in 'Plumbing Forum' started by Cornelllisken, Aug 16, 2009.

  1. Aug 16, 2009 #1

    Cornelllisken

    Cornelllisken

    Cornelllisken

    New Member

    Joined:
    Aug 16, 2009
    Messages:
    3
    Likes Received:
    0
    I would like to add a shower to a 30's era bathtub. I saw an outside mount shower system in the Restoration Hardware catalog that looks like it help avoid installing the plumbing line to the shower inside of the plaster wall. But this "system" is very expensive (as is everything at Restoration Hardware). Does anyone have a suggestion of where I might find the outside mount plumbing lines and fixtures? And would this work? I realize I will need to tile the two walls adjacent to the tub and then figure out a system to contain the water at the end and open side of the tub. I was hoping to find something like the Europeans use--like swinging shower doors rather than a shower curtain.
    Thanks for any advice!!
    :)
     
  2. Aug 17, 2009 #2

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Welcome CornellLisken:
    You could use 1/2" galvanized steel pipe for the shower. The reason the Restoration pipe is so expensive is because it is brass pipe. Yes, exposed plumbing lines work very well, while being much more servicible.
    Glenn
     

Share This Page