Can't get garage door closed tightly

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TechLauren

New Member
Joined
Mar 10, 2017
Messages
1
Reaction score
0
I leveled and balanced my garage door following some videos after replacing the bottom weather seal but, although the door is perfect and seals nice on the floor while I'm working on it, as soon as I tighten the set screws on the spring and remove the winding bar, it lifts the door about 3/4" in the closed position leaving a bottom gap on both sides and the middle is barley touching.

I've tried pushing the spring out so the coils aren't touching and and tightening it down and that didn't work so I let it go back but it's the same no matter what. I just went out there and felt the spring and I'm able to move it around it's not all solid and bound up on itself.

The door did close on the thin, dry old bottom strip so it's nothing to do with the permanent brackets.

I've been working on this for a week now and all crap is blowing in the garage.

There must be something weird I'm doing when I tighten the set screw on the spring that adds this tension. I even tried leaving the cables on both sides pretty loosey goosey before tightening the set screws on the spring but the cables are still so tight after and the door is still up a bit.

This has nothing to do with the opener. The opener is already set to push down all the way and I can't even push this door down by stepping on it.

The only way I can get it on the floor is to put a winding bar in and take the set screws on the spring! Then is sits nice on the floor.

PLEASE HELP!
 
Back the springs off a turn or two then lock the set screws down.
 
If you get rid of the tendency of the door to rise again an inch after being pushed all the way down then the opener will need to exert more force during the opening cycle. I am guessing that the overall power consumption in the long run will become greater.
 

Latest posts

Back
Top