Cleaning Steel Drums

Discussion in 'Cleaning' started by Admin, Oct 7, 2013.

  1. Oct 7, 2013 #1

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    My landlord dropped off my steel drums so I can start burning off the brush in my yard.

    He mentioned as he unloaded them that they have an industrial lubricant in them but didn't know what it was.

    How would I clean these things out to make sure I don't inhale dangerous vapors.
     
  2. Oct 7, 2013 #2

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    Fire is the best cleaner in this situation, just stand back during the first burn to avoid inhaling the fumes.
     
    Austin likes this.
  3. Oct 7, 2013 #3

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    The first thing you should do is review the MSDS information on the side of the drum. Where I work we no longer give away or sell used drums. The liability, traceability and all around risks are too high. We have a cleaning process and all cleaning materials are processed in our waste treatment facility and then we have a barrel crusher and the go into scrap steel.

    Some things are fairly safe until you burn them and then the fumes can be quite toxic. The old school way and the way I remember as a kid is dad brings home a drum from work and we took a pick ax and punched holes in the side and bottom for air. Filled it up with papers and lit it off any day of the week except Monday that was laundry day. Who knew what we were inhaling and everyone did it and no one was going to call the cops. Today I would rather burn in a pile if I had to and forget the industrial drums.

    Read the MSDS and proceed at your own risk.
     
    nealtw and Austin like this.
  4. Oct 8, 2013 #4

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    I'm going to use a combination of soap and fire. It's been raining so a lot of it is already starting to make it's way out.

    I'll burn out when the kids aren't around. I am afraid of fumes from an industrial lubricant. I have two, so I'm going to get all this burn off done pretty quick I'm hoping.
     
  5. Oct 9, 2013 #5

    Drywallinfo

    Drywallinfo

    Drywallinfo

    Well-Known Member

    Joined:
    May 21, 2013
    Messages:
    152
    Likes Received:
    36
    Also, make sure you have a hole in the bottom of your barrel for air intake. In addition, you should cut out a 4" by 4" square on the side about mid level. Without the vent holes, this will not burn worth a darn. To cut these holes out, you can use a 7 1/4" carborundum blade on a circular saw, but wear gloves and eye protection as there will be a lot of hot sparks flying.
     
  6. Oct 9, 2013 #6

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    With the understanding you get the drum somewhat cleaned out and know the side effects of burning the residual material and use caution for yourself and others.

    The best method for burning brush as you mentioned in a drum burner and getting proper venting and ease of cleanup is to remove the entire bottom and place the drum on 3 concrete blocks to raise it off the ground. Thus using it as a tall fire ring. The drum will too fast fill with ash with any other method and then some rain and you will have something almost impossible to move. Once the heat burns off all outer paint coating the drum will rust very fast making removal even harder. With the bottom out it will contain the fire and between burns it’s easy to shovel out the ash from the bottom. Place it in manageable size containers for disposal or use it in your garden. Drum will last about a year around here maybe longer in Texas and when it’s rusted out it will self-destruct and will be easy to get rid of.

    Keep the second one as a replacement.
     
  7. Oct 15, 2013 #7

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    Learned my lesson on the side hole. I cut bottom holes, but they weren't enough. Then it rained. Now I have to empty out the barrel and cut another hole in it.
     
  8. Oct 16, 2013 #8

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
    Did you burn the barrel first?
     
  9. Oct 16, 2013 #9

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    Cut the whole bottom out and you will thank me later. By setting it up on blocks and letting the ash fall out the bottom the drum will last about 5 times as long. Wet heavy ash in the bottom will rust them out really fast. :D
     
    inspectorD likes this.
  10. Oct 16, 2013 #10

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    I did a quick burn out, but it didn't burn too long.
     
    nealtw likes this.
  11. Oct 17, 2013 #11

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    I failed to mention the first time I burned it out I just dumped gas and "Booooom!".

    It was pretty great.
     
  12. Oct 17, 2013 #12

    oldognewtrick

    oldognewtrick

    oldognewtrick

    Administrator Staff Member Admin Moderator

    Joined:
    Jul 26, 2009
    Messages:
    10,818
    Likes Received:
    1,435
    You're lucky, now go buy a lotto ticket..
     
    nealtw likes this.
  13. Oct 18, 2013 #13

    bud16415

    bud16415

    bud16415

    Fixer Upper Staff Member Admin Moderator

    Joined:
    Feb 5, 2013
    Messages:
    4,663
    Likes Received:
    1,602
    Austin we have lift off! :eek:
     
  14. Oct 18, 2013 #14

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    I knew it was going to happen. I did it on purpose.
     
  15. Oct 18, 2013 #15

    oldognewtrick

    oldognewtrick

    oldognewtrick

    Administrator Staff Member Admin Moderator

    Joined:
    Jul 26, 2009
    Messages:
    10,818
    Likes Received:
    1,435
    Yeah, right says Austin with smoking eyebrows and singed wrist hair. Did you at least first say "Hey, hold my beer and watch this"?
     
  16. Oct 22, 2013 #16

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    I didn't have a beer.

    The way I set it up and the amount of gas I use to get it started make it sound like a shotgun blast. I can feel the force from it. It's pretty great.
     
  17. Nov 11, 2013 #17

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    Just an update.

    I have it working. I set to rows of holes, one towards the bottom, the other towards the middle and it burns everything to pure ash. Very little coal.

    I get a big boom after lighting it, and I am enjoying that, but I know I will lose my eyebrows before to long.
     
  18. Nov 12, 2013 #18

    Chris

    Chris

    Chris

    Guest

    Wish I could burn things here. I would be arrested if I had a burn can.
     
  19. Nov 12, 2013 #19

    Admin

    Admin

    Admin

    Administrator Staff Member Admin Moderator

    Joined:
    Oct 12, 2012
    Messages:
    1,207
    Likes Received:
    74
    Your state sounds screwy. It's encouraged here. All neighbors have burn cans. I'm using the ash to fertilize the yard. We'll see how well it works.
     
  20. Nov 12, 2013 #20

    oldognewtrick

    oldognewtrick

    oldognewtrick

    Administrator Staff Member Admin Moderator

    Joined:
    Jul 26, 2009
    Messages:
    10,818
    Likes Received:
    1,435
    Have the cats been a problem since you started scattering the ash or were they there before you started this?
     

Share This Page