Garage floor coating

Discussion in 'Decks & Patios' started by Fredartic, Apr 17, 2013.

  1. Apr 17, 2013 #1

    Fredartic

    Fredartic

    Fredartic

    Member

    Joined:
    Apr 17, 2013
    Messages:
    15
    Likes Received:
    1
    What do you put on your garage floor as coating? Epoxy? Sealer? Tiles? Paint? And do you recommand it or not? Which product is the best and cheaper?

    Thanks
     
  2. Apr 17, 2013 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,897
    Likes Received:
    3,118
    I may not have any solutions for your but, how old is the concrete and does it have oil stains and such. Do you park a car in it or are you using it for other stuff?
     
  3. Apr 17, 2013 #3

    CallMeVilla

    CallMeVilla

    CallMeVilla

    Well-Known Member

    Joined:
    Feb 9, 2010
    Messages:
    1,651
    Likes Received:
    594
    I am about to apply an epoxy coating to a garage in the next few weeks. It is highly durable and stain resistant. You can include skid resistant chips for safety or "the look."

    You MUST make sure the floor is totally free of oil, so prep is a must. Clean it, degrease it, and etch it to get the best bond.

    http://www.epoxy-coat.com/?gclid=CIHr7_bY0rYCFaR_QgodFgYA9A

    Some guys will pre-mix the Part A in a bucket to ensure color uniformity. Then, they mix the Part A and B into a separate bucket. Here is a typical application process:

    [ame]http://www.youtube.com/watch?v=8Oo3YnM6auI[/ame]

    HAVE FUN!
     
  4. Apr 18, 2013 #4

    Fredartic

    Fredartic

    Fredartic

    Member

    Joined:
    Apr 17, 2013
    Messages:
    15
    Likes Received:
    1
    My garage floor has 10 years. Of course, there is some spot of oil or rust stains and there is some cracks around the drain. I used it to park my ATV, to store garden stuff and for little works. I like the Epoxy finish but I don t want to spend too much.
     
  5. Apr 19, 2013 #5

    BridgeMan

    BridgeMan

    BridgeMan

    Well-Known Member

    Joined:
    Aug 11, 2011
    Messages:
    744
    Likes Received:
    80
    If you're into cheap, epoxy isn't the way to go--way too expensive. The previous owner used an oil-based floor enamel on my shop floor, and it's holding up quite well (despite not liking welding slag burns, and concentrated grinder sparks). It can also be extremely slippery under the right (or actually, wrong) conditions, such as sawdust or wax shavings building up. I personally don't care for typical concrete floor paints, as most I've seen have adhesion problems after a while.
     
    stadry likes this.
  6. Jun 26, 2013 #6

    katypaver

    katypaver

    katypaver

    Member

    Joined:
    Jun 26, 2013
    Messages:
    5
    Likes Received:
    0
    To protect the underside of my car I use that large rubber mats sold at most large hardware chains. They do not allow moisture from the ground to rise up into the under carriage and are mold resistant and if you car leaks the stains wipe right up.
     
  7. Jul 1, 2013 #7

    BigDon

    BigDon

    BigDon

    Hammerer of Thumbs

    Joined:
    Jul 1, 2013
    Messages:
    7
    Likes Received:
    2
    I used the Quikrete epoxy finish on my Garage floor about 2 years ago. My home is about 35 years old and up to that point, had never had any coating on the floor. There were a few stains from the previous owners that I tried to get up with the acid included in the kit. I even went and bought extra acid and cleaned the floor two additional times.

    Needless to say, the epoxy in those areas chipped pretty bad. Also, I have a rolling chair at my workbench and the epoxy coating has started to come up in that area as well. Just something to be aware of before putting it down.

    And remember, you can never get your garage floor too clean!
     
    nealtw likes this.
  8. Dec 21, 2013 #8

    nvrfinished

    nvrfinished

    nvrfinished

    New Member

    Joined:
    Sep 22, 2013
    Messages:
    4
    Likes Received:
    1
    I recently did some research for my garage and ended up doing an epoxy coating which I'm very happy with. I did find a place called All Garage Floors that has information on all kinds of garage flooring which I found very helpful.

    What ever you decide to go with, I've learned that cheap flooring just gets you cheap results. The time and effort that you spend redoing a flooring of choice isn't worth it to save a few bucks.
     
    buckeyedoc likes this.
  9. Dec 27, 2013 #9

    mondaywest

    mondaywest

    mondaywest

    New Member

    Joined:
    Dec 20, 2013
    Messages:
    1
    Likes Received:
    0
    Use epoxy paint is best for garage floor coat. Before begin painting, sweep and clean the floor to remove stains with water and bleach mixture. Spray the cleaner on the stains and then scrub the stain using brush.
    Once the floor is clean and dry then repair all cracks. After then apply primer coat a long handled paint roller. Allow the primer to dry for at least few hours before applying the paint on the floor.
     
  10. Sep 13, 2014 #10

    stadry

    stadry

    stadry

    Member

    Joined:
    Jul 27, 2014
    Messages:
    191
    Likes Received:
    45
    we do this work professionally & always diamond grind the conc 1st,,, we then install the epoxy base coat, allow it to cure, then apply a urethane top coat to protect the epoxy,,, IF client wants chips, they're broadcast into the wet epoxy
     
    nealtw likes this.

Share This Page