Got an easy one for you guys.

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JoulesWinfield

Active Member
Joined
Dec 19, 2006
Messages
33
Reaction score
0
What would be the proper wire size and type to run to a 100 amp sub panel in an attached garage? The run is approx 80' from the main to the sub.

Im thinking it would be 2awg copper, 3 wire with ground? Im not sure what its called.
Or maybe 2/0 aluminum 3 wire with ground? Again not sure what that would be called either.
 
In my area we would run 2/2/2/4AL SER cable.

So youre saying the SER cable is aluminum with three 2awg and a 4awg ground?
Aluminum seems to be the standard in my area for larger feeds, but I was wondering if copper wouldnt be cheeper (since it would be a smaller size) and better (since it would be easier to work with and more the norm).
 
Well first off even the smaller copper would NOT be cheaper since copper is through the roof expensive these days.
Also, the slightly larger AL is not really any harder to work with.
 
Back
Top