Kitchen cabinet question

Discussion in 'Carpentry and Woodworking' started by russte, Jun 2, 2009.

  1. Jun 2, 2009 #1

    russte

    russte

    russte

    New Member

    Joined:
    Jun 1, 2009
    Messages:
    2
    Likes Received:
    0
    Hello, I'm new to this site and have a question. I am refinishing my kitchen cabinets,they are oak, I have taken all the stain and varnish off and I have the 2 corner cabinets left, they both have a glass inlay and one of the glass has been siliconed in, how would you get the glass out of the cabinet without breaking the glass. The silicone is just dabbed in each corner not all the way around the glass, any advice would be appreicated.
    Thank you russte
     
  2. Jun 2, 2009 #2

    Nestor_Kelebay

    Nestor_Kelebay

    Nestor_Kelebay

    Emperor Penguin

    Joined:
    Mar 29, 2009
    Messages:
    1,844
    Likes Received:
    2
    I would just cut the silicone out with a razor scraper. Any place that sells paint will also sell razor scrapers for scraping paint off glass. A razor scraper will remove silicone from glass equally well.

    You'll also need to remove the silicone from the wood, and you can do that with a razor too, but dull the razor beforehand, or use a duller tool to avoid cutting into the wood. Once you cut through the silicone and get the glass out, you should be able to remove most of the rest of the silicone from the wood with a paint scraper (without harming the wood).

    Now, even though you'll probably think you've gotten all the silicone caulk off the glass and wood, you almost certainly won't have. Typically, there will be a thin film of silicone caulk that remains behind on the glass or wood that prevents any new silicone from sticking to those same surfaces. In order to get new silicone caulk to stick to those same places you need to remove the old silicone caulk completely. To learn how to do that, simply scroll down in this forum to the thread entitled "bathtub caulk" and read my long post on the first page of it.
     
    Last edited: Jun 2, 2009
  3. Jun 3, 2009 #3

    russte

    russte

    russte

    New Member

    Joined:
    Jun 1, 2009
    Messages:
    2
    Likes Received:
    0
    Thanks Nester, I'll take your advice.....russte
     

Share This Page