Kitchen Top Backsplash urgent repair

[Aabha Dubey]

Hi, This is my first post and I am seeking some advise on repair of the particle board/lamination/formica repair. Not sure if I am using right words to describe the problem. Horizontal Wood surface behind the kitchen faucet has some bulging. Lamination/Tile/Formica and particle board have developed some gap.

I have attached photos to show the problem area. How can I fix it?
Please advise in this regard. I need to fix it next two day.

 

[joecaption]

There is no "fixing it", it needs to be removed and replaced with new.

 

[nealtw]

If you are sure the wood is dry behind there turn your iron up high and put paper over the laminate and re activate the glue. Have a short block of 2x4 handy to rub it down tight while it is hot.

 

[bud16415]

It won’t be perfect.


If it is dry. I would brush contact glue into the crack on both surfaces. Let it dry. Then push it back together. Rub it with a roller or stick or tap it with a rubber hammer to make sure it is tight.