My Dishwasher KitchenAid not spraying water

Discussion in 'General Appliance Discussion' started by Raji Elshaer, May 14, 2007.

Help Support House Repair Talk by donating using the link above.
  1. May 14, 2007 #1

    Raji Elshaer

    Raji Elshaer

    Raji Elshaer

    New Member

    Joined:
    May 14, 2007
    Messages:
    2
    Likes Received:
    0
    Hello,

    My dishwasher upper and middle sprayers stopped working and noticed that the water is filling well into the dishwasher but not strong enough to reach the upper levels of it, the dishes still not clean when the cycle is completed. Any ideas on what caused this.
    the water pressure from the main is strong as ever.

    Thank you in advance.

    Raji
     
  2. May 14, 2007 #2

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Welcome Raji:
    The spray pressure in the dishwasher is not dependent on the municipal water pressure but, rather on a pump inside.
    It sounds more like an obstruction in the circulating system, leaking pump system, or just a worn out pump.
    Jeff1 is our professional appliance man. He can tell you exactly where to check and what to look for.
    Glenn
     
  3. May 14, 2007 #3

    Raji Elshaer

    Raji Elshaer

    Raji Elshaer

    New Member

    Joined:
    May 14, 2007
    Messages:
    2
    Likes Received:
    0
    Thank you Glenn for the welcoming massage. I do not see any leaking from the machine at all. Is the pump you reference has anything to do with the water inlet valve. could that be the cause the issue?

    Thanks again.
    Raji
     
  4. May 14, 2007 #4

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4

Share This Page