Patio ceiling install

Discussion in 'Decks & Patios' started by DIYNana, Mar 29, 2013.

  1. Mar 29, 2013 #1

    DIYNana

    DIYNana

    DIYNana

    Member

    Joined:
    Mar 25, 2013
    Messages:
    11
    Likes Received:
    1
    My patio roof ceiling is the underside of the plywood and the nails coming through from the shingles. So ugly. Supports are 24" on center. Would like to add a cover that runs between supports to keep as high a profile as possible. Any ideas on affordable materials and track to hold it up would be much appreciated. Roof is in good shape with no leaks but doesn't look finished.
     
  2. Mar 29, 2013 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,892
    Likes Received:
    3,117
    Vinyl soffet is the easiest and likley the cheapest way to finish it. Depending on the direction, which is decided by best use of product, you may have to strap it with 1x4. It come in 2 width, for long runs you want the narrower size for less sagging.
    http://www.front-porch-ideas-and-more.com/porch-ceilings.html
     
  3. Mar 30, 2013 #3

    DIYNana

    DIYNana

    DIYNana

    Member

    Joined:
    Mar 25, 2013
    Messages:
    11
    Likes Received:
    1
    Thanks for the reply. Will check out this website. Sure it will give me some advice.
     

Share This Page