Plywood panels on 2nd story

Discussion in 'Introductions' started by kbm, Nov 19, 2007.

  1. Nov 19, 2007 #1

    kbm

    kbm

    kbm

    New Member

    Joined:
    Nov 19, 2007
    Messages:
    4
    Likes Received:
    0
    edit: I just noticed I am not supposed to ask questions in "Intro" so I am posting this in the "Roof and Siding" section.
    ====================================

    Hello everyone. I live in northern california.
    My 2 story home has extensive water damage inside and outside around chimney enclosure. The buider cut a hole in the siding to make room for the gutter! Over a span of 20+ years, 2nd story gutter overflow went invisibly inside the wall and resulted in much damage. Luckily this area does not support the structural floor load of the house.

    So I am repairing the wooden frame and the question pertains to the installation of the plywood side panels.

    What is the best method to safely haul 4x4 panels up to the 2nd story for installation?

    I am working with a 24' ladder and I have tied down and rigidized the ladder. But I am not feeling safe carrying any load with my hands while climbing the ladder.
    Right now I am working alone, but if I need a helper I will get one.

    Thanks for your help.
    KenBM

    IMG_0627s.JPG
     
  2. Nov 19, 2007 #2

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Welcome Kent:
    Man! He sure made a mess for you.
    To raise the plywood panels to the second floor;
    1. drive 2 16d nails for the panel to rest on when you get it up there.
    2. tie a rope around the panel about 1/3 of the way down from the top.
    3. use a timber hitch or other simple slip knot so you can get it loose quick.
    4. beware of winds, they give large panels a mind of their own.
    Alternately, you may want to slide the panel up the ladder ahead of you; just be ready to put a screw or nail in it when you get there.
    Driving nails in a finished wall may crack sheet rock joints or knock pictures off the wall.
    We are pulling for you. I know, you just wish we were on the rope now.
    Glenn
     
  3. Nov 20, 2007 #3

    kbm

    kbm

    kbm

    New Member

    Joined:
    Nov 19, 2007
    Messages:
    4
    Likes Received:
    0
    Glenn, thanks for pointer.
    This is an interesting method, I'll give it some thoughts.
    I wouldn't try it if there any wind.
    KenBM
     

Share This Page