Powerwashing Interlocking Brick

Discussion in 'Bricks, Masonry and Concrete' started by stevchoi, Mar 26, 2012.

  1. Mar 26, 2012 #1

    stevchoi

    stevchoi

    stevchoi

    New Member

    Joined:
    Mar 26, 2012
    Messages:
    3
    Likes Received:
    0
    Recently power washed my interlocking brick. I understand I need to put sand in between the gaps caused by the power wash. Two things.

    1) I'd like to understand how to put the sand into the gaps
    2) Do I need to seal the brick?
     
  2. Mar 26, 2012 #2

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    spread the sand over the surface and work it back and forth with a wide push broom, lightly water it down to settle the sand into the cracks.
    you don't necessarily have to seal the brick but, if you would like to do that; seal the brick using a garden sprayer jug with pump and wand.
     
  3. Mar 28, 2012 #3

    stevchoi

    stevchoi

    stevchoi

    New Member

    Joined:
    Mar 26, 2012
    Messages:
    3
    Likes Received:
    0
    Thanks! Very helpful.
     

Share This Page