Shower liner replacement

Discussion in 'Plumbing Forum' started by mrbrown38, Mar 15, 2012.

  1. Mar 15, 2012 #1

    mrbrown38

    mrbrown38

    mrbrown38

    New Member

    Joined:
    Mar 14, 2012
    Messages:
    3
    Likes Received:
    0
    I'm sure it has a proper term, but I'm unsure of what it's called. There is a plastic/rubber piece that sits under the door of my shower door. It is hardened and looks like it's full of mold.

    I was wondering what it's called and how I replacement?

    Here is a picture of what it looks like:
    [​IMG]

    I tried ripping out the current lining, but it looked like I was just ripping out the top portion.
     
  2. Mar 15, 2012 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
  3. Mar 15, 2012 #3

    mrbrown38

    mrbrown38

    mrbrown38

    New Member

    Joined:
    Mar 14, 2012
    Messages:
    3
    Likes Received:
    0
    Thank you very much. Shower Door Sweep, I'll remember that.

    Any recommendations on removal? Do I have to take the frame apart somehow?
     
  4. Mar 15, 2012 #4

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
    If you can find the right replacement, you might have to take it apart, but if all you can find is something to stick on top than I guess you could just cut it off flush.
     
  5. Apr 5, 2012 #5

    mrbrown38

    mrbrown38

    mrbrown38

    New Member

    Joined:
    Mar 14, 2012
    Messages:
    3
    Likes Received:
    0
    Back again =). So I think cutting it flesh might be the way to go. I can't figure out how to take the frame apart and feel like if I push any further I'll destroy the frame.

    If I cut it off flesh, what are my options at that point?
     
  6. Apr 5, 2012 #6

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,899
    Likes Received:
    3,118
    You will have to find something simular that is a peel and stick. You may find it a hardware stores or glass shop.
     

Share This Page