Skylight interior panel

Discussion in 'Windows and Doors' started by DonnaFL, Jan 1, 2013.

  1. Jan 1, 2013 #1

    DonnaFL

    DonnaFL

    DonnaFL

    Junior Member

    Joined:
    Sep 16, 2007
    Messages:
    6
    Likes Received:
    0
    Our house was built in the 1970's and has two sky lights, one in each bathroom. The interior translucent glass panel, which sits in a a frame in the ceiling, is about 1/4 to 3/8 inch thick.

    Over time, debris, dead bugs, etc., fall on the glass and is visible as a shadow to anyone in the bathroom. It is nearly impossible to clean the panel because 1) the glass panel is heavy and 2) the framing makes it nearly impossible to move the glass panel up to clean the attic side of the glass.

    After having attempted to clean one of the panels and succeeding in getting the glass panel wedged in the wood framing and having to shave the wood and also splintering the edges of the glass, I would like to know if there is an easier way to deal with the cleaning. Or maybe replace the glass panels with something else.

    Is there another material that can be used for the interior ceiling-to-attic panel instead of glass? Something that has some flexibility, but also not so flimsy that bugs or other larger critters that might end up in the attic would be able fall/crawl through.

    Is there a name for what I am looking for, because I cannot find this item when searching sites like Home Depot or Lowe's?

    Or is this something that would need to be custom cut?

    Thanks,
    Donna in Florida
     
  2. Jan 1, 2013 #2

    Wuzzat?

    Wuzzat?

    Wuzzat?

    Well-Known Member Sponsor

    Joined:
    Jan 20, 2010
    Messages:
    2,471
    Likes Received:
    175
    With considerable design effort and woodworking skill you could make a frame for the translucent glass that swivels for cleaning. The weight of the glass would be carried by the swivels, possibly 1/4" dia. metal rods.

    The tricky part is making this moveable piece and its mating frame to look halfway decent when a person looks up at it.
     
  3. Jan 1, 2013 #3

    DonnaFL

    DonnaFL

    DonnaFL

    Junior Member

    Joined:
    Sep 16, 2007
    Messages:
    6
    Likes Received:
    0
    Unfortunately - I'm not that skilled and neither is my husband.
     
  4. Jan 1, 2013 #4

    Wuzzat?

    Wuzzat?

    Wuzzat?

    Well-Known Member Sponsor

    Joined:
    Jan 20, 2010
    Messages:
    2,471
    Likes Received:
    175
    Maybe someone makes such a device but coming up with relevant search terms may be difficult.
    It would take me a few hours to make this thing so it would cost a few hundred.
     
  5. Jan 2, 2013 #5

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,892
    Likes Received:
    3,117
    Most times walls between the ceiling and the roof are built as walls that can be insulated and there is no glass at the ceiling.
     

Share This Page