Just purchased a new house and at the inspection the inspector advised me to separate the ground and neutrals in the sub panel that feeds the garage. How can this be done? Also I have an older style main panel that does not have a single breaker to shut off all circuits there are 5 which were grandfathered in.
This brings me to my next question I am installing a 220V hot tub. Can I feed the 40A breaker from the sub panel? So now question 3 how would I derive the 220V from the panel (how do you accomplish this) I have done different electrical jobs wiring sockets light fittings fans etc but never taken on anything this big and i want to get it right for obvious reasons. I do intend on put a GFCI outside for this as well as the manadtory shutoff within 10ft of the tub.
Thanks
Sandie
This brings me to my next question I am installing a 220V hot tub. Can I feed the 40A breaker from the sub panel? So now question 3 how would I derive the 220V from the panel (how do you accomplish this) I have done different electrical jobs wiring sockets light fittings fans etc but never taken on anything this big and i want to get it right for obvious reasons. I do intend on put a GFCI outside for this as well as the manadtory shutoff within 10ft of the tub.
Thanks
Sandie